This article reports on a new phenomenon: The presence of a compatibilizer accelerates the melting/plastification of an immiscible polymer blend during melt blending. The increase in the rate of melting as a result of the addition of a compatibilizer is believed to be one of the important factors re
Effects of Viscosity-Controlled Interfacial Mobility on the Coalescence of Immiscible Polymer Blends
✍ Scribed by Massimiliano Gabriele; Rossana Pasquino; Nino Grizzuti
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 415 KB
- Volume
- 296
- Category
- Article
- ISSN
- 1438-7492
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The consequences of the interfacial mobility on the coalescence process in immiscible polymer blends was studied. Blends of PIB and PDMS with 10 vol.% PIB were subjected to shear‐flow step‐down experiments under controlled conditions. The blend was initially sheared at high shear rate to obtain a fine dispersion (small drop size). The shear rate was then stepped down and the coalescence process was monitored by performing repeated SAOS experiments. In the limit of high and low viscosity ratios, the experimental results were in excellent agreement with theory predictions for IMI and FMI conditions. In the intermediate range of viscosity ratio, corresponding to PMI conditions, a smooth transition between the limiting IMI and FMI states was found.
magnified image
📜 SIMILAR VOLUMES
## Abstract The morphology of some ternary blends was investigated. In all of the blends polypropylene, as the major phase, was blended with two different minor phases, ethylene–propylene–diene terpolymer (EPDM) or ethylene–propylene–rubber (EPR) as the first minor phase and high‐density polyethyle
The results of theories of the Ostwald ripening and coalescence applied to molten quiescent polymer blends with dispersed phase structure were analyzed. From a comparison of predictions of the theories with available experimental results follows that coarsening of the phase structure in quiescent po
## Abstract **Summary:** This communication describes the effect of organic modifier miscibility with the matrices, and the effect of the initial interlayer spacing of the organoclay, on the overall morphology and properties of an immiscible polycarbonate/poly(methyl methacrylate) blend. By varying
In order to investigate the effect of interfacial tension on the formation of gradient phase morphology in polymer blends, a saponification reaction was carried out in this study to obtain several kinds of EVA with different contents of -OH groups. These EVAs with different -OH contents, namely with