𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effects of Thermal Annealing Upon the Morphology of Polymer–Fullerene Blends

✍ Scribed by Eric Verploegen; Rajib Mondal; Christopher J. Bettinger; Seihout Sok; Michael F. Toney; Zhenan Bao


Publisher
John Wiley and Sons
Year
2010
Tongue
English
Weight
700 KB
Volume
20
Category
Article
ISSN
1616-301X

No coin nor oath required. For personal study only.


📜 SIMILAR VOLUMES


Effects of Thermal Annealing Upon the Na
✍ Samuele Lilliu; Tiziano Agostinelli; Eric Verploegen; Ellis Pires; Mark Hampton; 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 462 KB

## Abstract Grazing incidence X‐ray diffraction (GI‐XRD) is used to characterize the crystallographic dynamics of low molecular weight (LMW) and high molecular weight (HMW) poly(3‐hexylselenophene) (P3HS) films and blend films of P3HS with [6‐6‐]‐phenyl‐C~61~‐butyric acid methyl ester (PCBM) as a f

Effects of annealing on morphology of po
✍ şaziye Uğur; önder Pekcan 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 277 KB 👁 2 views

## Abstract Steady state fluorescence (SSF) technique conjunction with optical microscopy were used to study the morphology of polystyrene (PS)/poly(methyl methacrylate) (PMMA) blend upon annealing above glass transition in elevated time intervals. The PS/PMMA blends were prepared from dissolution

Charge Transfer Excitons in Polymer/Full
✍ Markus Hallermann; Ilka Kriegel; Enrico Da Como; Josef M. Berger; Elizabeth von 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 542 KB

## Abstract Here, it is shown how carrier recombination through charge transfer excitons between conjugated polymers and fullerene molecules is mainly controlled by the intrachain conformation of the polymer, and to a limited extent by the mesoscopic morphology of the blend. This experimental resul

The study of thermal and gross morpholog
✍ Chu, C. C. ;Browning, A. 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 858 KB

The objective of this study is to alter the fiber morphology of a linear aliphatic polyester, polyglycolic acid, by annealing treatment and to examine the changes of its degradation properties. The annealing was done at 150"C, 170"C, and 190"C, and the specimens were annealed in four different strai

Effects of processing conditions on the
✍ B. I. Chaudhry; E. Hage; L. A. Pessan 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 517 KB

The phase morphology of PC/ABS blends can be significantly affected by its processing conditions. Blends prepared in a mixing chamber at different conditions show a strong influence of mixing time and temperature on its morphology. The blend morphology changes from a well-dispersed PC phase surround