✦ LIBER ✦

Effects of test frequency and cure on glass transition temperature predictions on some epoxy polymers

✍ Scribed by Gilbert F. Lee; Bruce Hartmann

Publisher: John Wiley and Sons
Year: 1984
Tongue: English
Weight: 223 KB
Volume: 29
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.1984.070290440

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

On the relationship between microhardnes

On the relationship between microhardness and glass transition temperature of some amorphous polymers

✍ S. Fakirov; F. J. Baltá Calleja; M. Krumova 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 115 KB 👁 2 views

On the basis of microhardness (H) data measured at room temperature only for a number of polymers in the glassy state, a linear correlation between H and the glass transition temperature T g has been found (H ϭ 1.97T g Ϫ 571). By means of this relationship, the deviation of the H values from the add

New theory on the physical properties of

New theory on the physical properties of polymers from cured resins to linear polymers: Melting temperature, glass-transition temperature, and strength

✍ Yahachiro Matsushita 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 139 KB 👁 1 views

Tris(trimethylsilyl)methyl functionalize

Tris(trimethylsilyl)methyl functionalized 4-chloromethyl styrene polymers: Effects of side chain modification on polymer structure and glass transition temperature

✍ Mirzaagha Babazadeh 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 178 KB 👁 2 views

## Abstract 4‐Chloromethyl styrene was copolymerized with various molar ratio of methyl methacrylate or ethyl methacrylate by solution free radical polymerization method, at 70 ± 1°C using α,α′‐azobis(isobutyronitrile) as an initiator. Then, very highly sterically hindered tris(trimethylsilyl)methy

Effect of hygrothermal aging history on

Effect of hygrothermal aging history on sorption process, swelling, and glass transition temperature in a particle-filled epoxy-based adhesive

✍ M. Fernández-García; M. Y. M. Chiang 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 181 KB 👁 2 views

Effects of reactive low-profile additive

Effects of reactive low-profile additives on the properties of cured unsaturated polyester resins. II. Glass-transition temperature and mechanical properties

✍ Jyh-Ping Dong; Jeng-Huei Lee; Duen-Horng Lai; Yan-Jyi Huang 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 158 KB 👁 1 views

## Abstract The effects of reactive poly(methyl methacrylate) (PMMA) and poly(vinyl acetate)‐__block__‐poly(methyl methacrylate) (PVAc‐__b__‐PMMA) as low‐profile additives (LPAs) on the glass‐transition temperature and mechanical properties of low‐shrink unsaturated polyester resin (UP) were invest

Effects of poly(methyl methacrylate)-bas

Effects of poly(methyl methacrylate)-based low-profile additives on the properties of cured unsaturated polyester resins. I. Miscibility, curing behavior, and glass-transition temperatures

✍ Jyh-Ping Dong; Jyh-Gau Huang; Fuh-Huah Lee; Jiunn-Wei Roan; Yan-Jyi Huang 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 398 KB 👁 2 views