𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effects of Stitching on Delamination of Satin Weave Carbon-Epoxy Laminates Under Mode I, Mode II and Mixed-Mode I/II Loadings

✍ Scribed by Walid Trabelsi; Laurent Michel; Renaud Othomene

Book ID
106335520
Publisher
Springer Netherlands
Year
2010
Tongue
English
Weight
972 KB
Volume
17
Category
Article
ISSN
0929-189X

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Fatigue delamination, initiation, and gr
Fatigue delamination, initiation, and growth, under mode I and II of fracture in a carbon-fiber epoxy composite
✍ Antonio ArgΓΌelles; Jaime ViΓ±a; Alfonso F. Canteli; Jorge Bonhomme πŸ“‚ Article πŸ“… 2009 πŸ› Society for Plastic Engineers 🌐 English βš– 406 KB

## Abstract In this article, interlaminar crack initiation and propagation under mode I and II dynamic loading of an epoxy matrix reinforced with unidirectional carbon fibers were evaluated. Delamination in mode I was carried out employing the DCB test (Double Cantilever Beam). In mode II, the ENF

Effects of loading rate and thickness on
Effects of loading rate and thickness on mixed-mode I/II fracture toughness of thermoset epoxy resin
✍ C. Kanchanomai; S. Rattananon πŸ“‚ Article πŸ“… 2008 πŸ› John Wiley and Sons 🌐 English βš– 424 KB πŸ‘ 2 views

## Abstract The influences of loading rate and thickness on fracture behavior and mechanism of thermoset epoxy resin with polyamine hardener under mixed‐mode (mode I/II) loading have been studied at low thickness and low loading rate (LTLL), as well as high thickness and high loading rate (HTHL). U

Modes I and II interlaminar fracture tou
Modes I and II interlaminar fracture toughness and fatigue delamination of CF/epoxy laminates with self-same epoxy interleaf
✍ Masaki Hojo; Tadashi Ando; Mototsugu Tanaka; Taiji Adachi; Shojiro Ochiai; Yoshi πŸ“‚ Article πŸ“… 2006 πŸ› Elsevier Science 🌐 English βš– 721 KB

Interlaminar fracture toughness and delamination fatigue crack growth behavior were investigated for carbon fiber (CF)/epoxy laminates with the self-same epoxy interleaf. The matrix epoxy with a thickness of 50 lm was chosen as the interleaf material in order to clarify the effect of resin-rich laye