✦ LIBER ✦

Effects of short cracks on fatigue life calculations

✍ Scribed by C. Kaynak; A. Ankara; T.J. Baker

Publisher: Elsevier Science
Year: 1996
Tongue: English
Weight: 641 KB
Volume: 18
Category: Article
ISSN: 0142-1123
DOI: 10.1016/0142-1123(95)00075-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of short fatigue cracks on plane

Effect of short fatigue cracks on plane strain fracture toughness

✍ C.N. Freed 📂 Article 📅 1970 🏛 Elsevier Science 🌐 English ⚖ 159 KB

AN IMPORTANT feature of the fracture mechanics approach to fracture toughness is the introduction of a fatigue crack at the notch tip of the specimen. For the fatigue crack to represent the Raw or crack which will exist in a structure, two conditions must be met: The crack must be formed in the spec

Description of behavior of short fatigue

Description of behavior of short fatigue cracks

✍ S. Saehn; M. Schaper; P. Saeliger 📂 Article 📅 1990 🏛 Springer 🌐 English ⚖ 346 KB

Near-threshold growth of short fatigue c

Near-threshold growth of short fatigue cracks

✍ O. N. Romaniv; V. N. Simin'kovich; A. N. Tkach 📂 Article 📅 1982 🏛 Springer 🌐 English ⚖ 725 KB

“PHYBAL” a Short-Time Procedure for a Re

“PHYBAL” a Short-Time Procedure for a Reliable Fatigue Life Calculation

✍ Peter Starke; Frank Walther; Dietmar Eifler 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 671 KB

A further study on fatigue crack initiat

A further study on fatigue crack initiation life — mechanical model for fatigue crack initiation

✍ Zheng Xiulin 📂 Article 📅 1986 🏛 Elsevier Science 🌐 English ⚖ 537 KB

Fatigue-life calculations on pristine an

Fatigue-life calculations on pristine and corroded open-hole specimens using small-crack theory

✍ J.C. Newman Jr.; W. Abbott 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 501 KB

This paper uses a plasticity-induced crack-closure model and small-crack theory to calculate the fatigue lives of 2024-T3 aluminum alloy sheet specimens with open holes subjected to cantilever (R = À1) bending loads. The bending specimens had three drilled holes that were either pristine or exposed