๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Effects of powder concentration and type of resin on the performance of marble composite structures

โœ Scribed by C. Borsellino; L. Calabrese; G. Di Bella

Publisher
Elsevier Science
Year
2009
Tongue
English
Weight
608 KB
Volume
23
Category
Article
ISSN
0950-0618

No coin nor oath required. For personal study only.

โœฆ Synopsis

In this work, we will expose the behaviour of a composite structure reinforced with marble powder. The attention was focused on the effects produced on the physical and mechanical properties due to different kinds of matrix (epoxy and polyester resins) and filler amounts (60%, 70%, 80%). Rheological, static flexural and Izod impact tests have been carried out. An experiment designed was defined for the mechanical tests, in order to quantify the effects of both the resin and the marble percentage on the material properties, as well as to identify a possible correlation between these factors. Moreover, water absorption and stain resistance have been evaluated to study the surface properties of the panels.

๐Ÿ“œ SIMILAR VOLUMES

Effect of nebulizer type and antibiotic
Effect of nebulizer type and antibiotic concentration on device performance
โœ Allan Weber; Greg Morlin; Morty Cohen; Judy Williams-Warren; Bonnie Ramsey; Arno ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 167 KB

We compared the performance of selected ultrasonic and jet nebulizers when aerosolizing several antibiotic formulations to determine optimum combinations for delivery of a respirable antibiotic aerosol. Three ultrasonic devices were tested: the UltraNeb 99/100, the UltraAIR and the Aerosonic. The re

Effect of fabrication method and resin t
Effect of fabrication method and resin type on performance of tibial bearings
โœ Currier, Barbara H. ;Currier, John H. ;Collier, John P. ;Mayor, Michael B. ๐Ÿ“‚ Article ๐Ÿ“… 2000 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 306 KB

Polyethylene has been used successfully for more than 30 years as an orthopedic bearing material. During this time, several polyethylene resins and fabrication methods have been used to produce bearings. Some bearings fail prematurely due to fatigue, which has been linked to oxidation and degradatio

Effects of various additives on the perf
Effects of various additives on the performance of bis-GMA/barium glass powder composites
โœ Sangwoo Kim; Jyongsik Jang ๐Ÿ“‚ Article ๐Ÿ“… 2000 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 196 KB ๐Ÿ‘ 2 views

The effects of various additives on the performance of 2,2ะˆ-bis[4-(methacryloxy-2-hydroxy-propoxy)-phenyl]-propane (Bis-GMA)/barium glass powder (Ba) composites were examined. Bis-GMA/Ba composites were manufactured by curing with visible light to measure various mechanical properties. The diametral