๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Effects of microstructure on fatigue crack propagation and crack closure behavior in aluminum alloy 7150

โœ Scribed by E. Zaiken; R.O. Ritchie


Publisher
Elsevier Science
Year
1985
Weight
1000 KB
Volume
70
Category
Article
ISSN
0025-5416

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


Effects of tensile overloads on crack cl
โœ R.D. Brown; J. Weertman ๐Ÿ“‚ Article ๐Ÿ“… 1978 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 996 KB

Ah&act-It has been suggested that the crack closure concept can account for the retardation in crack growth rate following removal of tensile overloads. To test this possibility measurements of effective stress were made on center notched cracked specimens during tests in which tensile overloads wer

On the cyclic behavior of cast and extru
โœ R.J. Stofanak; R.W. Hertzberg; G. Millers; R. Jaccard; K. Donald ๐Ÿ“‚ Article ๐Ÿ“… 1983 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 1012 KB

The fatigue crack propagation (FCP) response of a cast and extruded aluminum alloy was examined as a function of mean stress and specimen orientation. The extruded alloy was tested in both the longitudinal and transverse orientation and no difference in FCP response was noted. FCP tests were conduct

On the behavior of small fatigue cracks
โœ K.T.Venkateswara Rao; W. Yu; R.O. Ritchie ๐Ÿ“‚ Article ๐Ÿ“… 1988 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 980 KB

The fatigue crack propagation behavior of naturally-occurring, microstructurallysmall (l-1000 pm), surface cracks is examined as a function of microstructure in commercial aluminum-lithium alloys 2090-T8E41, 8091-T351 and 2091-T351, and results compared with behavior in traditional high-strength alu

Propagation and closure of small cracks
โœ Keisuke Tanaka; Yoshiaki Akiniwa; Kenichi Shimizu ๐Ÿ“‚ Article ๐Ÿ“… 1996 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 610 KB

The propagation behavior of small fatigue cracks in smooth specimens of an aluminum alloy (2024-T6) reinforced with 20% volume of SiC particles was studied under load-and displacement-controlled cyclic conditions. The development of crack closure with crack extension was measured through the complia