𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effects of Lewis-acid polymer on the electrochemical properties of alkylphosphate-based non-flammable gel electrolyte

✍ Scribed by Boor Singh Lalia; Nobuko Yoshimoto; Minato Egashira; Masayuki Morita

Publisher
Elsevier Science
Year
2009
Tongue
English
Weight
608 KB
Volume
194
Category
Article
ISSN
0378-7753

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Electrochemical investigations on the ef
Electrochemical investigations on the effect of dispersoid in PVA based solid polymer electrolytes
✍ S. Rajendran; M. Sivakumar; R. Subadevi; N.-L. Wu; J.-Y. Lee πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 543 KB

## Abstract Various compositions of TiO~2~ dispersed PVA‐PMMA‐LiBF~4~‐EC based electrolytes were prepared using solution casting technique. The prepared electrolytes were characterized using AC impedance, XRD, SEM, FTIR, etc. The ionic conductivity value is increased with the increase in filler con

Effect of pore structure on the electroc
Effect of pore structure on the electrochemical performance ofcoal-based activated carbons in non-aqueous electrolyte
✍ Chuan-xiang Zhang; Rui Zhang; Bao-lin Xing; Guo Cheng; Ying-bo Xie; Wen-ming Qia πŸ“‚ Article πŸ“… 2010 πŸ› Elsevier Science 🌐 English βš– 40 KB

SiC/Mo-Si multilayer coating was prepared on the surface of C/SiC composites by chemical vapor deposition (CVD) combined with slurry painting. The coating was composed of a dense CVD SiC coating alternating with a porous Mo-Si layer. From inside to outisde the coating consisted of CVD SiC, Mo-Si, CV

Some Reflection on the Evaluation of the
Some Reflection on the Evaluation of the Lewis Acid–Base Properties of Polymer Surfaces by Wetting Measurements
✍ Marco Morra πŸ“‚ Article πŸ“… 1996 πŸ› Elsevier Science 🌐 English βš– 54 KB

work of adhesion against model acidic or basic liquids (3). In the second approach, described by Good, Van Oss, and Chaudury, an acid parameter The letter underlines the need for a reflection and a debate on and a basic parameter characteristic for each solid are calculated from the quantitative re