✦ LIBER ✦

Effects of ion beam implantation on the corrosion behaviour of TiN-coated Ti-6Al-4V alloy

✍ Scribed by Y. Massiani; P. Gravier; J.P. Crousier; L. Fedrizzi; M. Dapor; V. Micheli; L. Roux

Book ID: 107930200
Publisher: Elsevier Science
Year: 1992
Tongue: English
Weight: 693 KB
Volume: 52
Category: Article
ISSN: 0257-8972
DOI: 10.1016/0257-8972(92)90042-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effects of ion implantation on Ti-6Al-4V

Effects of ion implantation on Ti-6Al-4V on its frictional behaviour against UHMWPE

✍ F. Alonso; J.J. Ugarte; D. Sansom; J.L. Viviente; J.I. Oñate 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 977 KB

Ion implantation of surgical Ti6Al4V a

Ion implantation of surgical Ti6Al4V alloy

✍ J.M. Williams; R.A. Buchanan 📂 Article 📅 1985 🏛 Elsevier Science ⚖ 849 KB

The effect of carbon ion implantation on

The effect of carbon ion implantation on the nucleation of diamond on Ti-6Al-4V alloy

✍ D.K. Sood; W.R. Drawl; Russell Messier 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 645 KB

Modification of Ti6Al4V Corrosion Proper

Modification of Ti6Al4V Corrosion Property by Nitrogen Ion Implantation

✍ Ali Shokouhy; Mahmood Ghoraneviss; Majid M. Larijani; Mehdi Yari; S. H. Haji Hos 📂 Article 📅 2011 🏛 Springer 🌐 English ⚖ 376 KB

Surface modification of Ti–6Al–4V alloy

Surface modification of Ti–6Al–4V alloy by nitrogen ion implantation

✍ P. Budzynski; A.A. Youssef; J. Sielanko 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 926 KB

Surface modification of titanium alloy (Ti-6Al-4V) by nitrogen implantation at the energy 120 keV with doses ranging from 1 × 10 16 to 1 × 10 18 N + /cm 2 have been investigated from the tribological point of view. Implantation of nitrogen ions was performed in two different ways: (a) when no carbon

Influence of sintering on the corrosion

Influence of sintering on the corrosion behavior of a Ti-6Al-4V alloy

✍ A. Bautista; C. Moral; G. Blanco; F. Velasco 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 German ⚖ 358 KB 👁 1 views

This work studies the influence of the sintering conditions of a Ti-6Al-4V alloy on its corrosion performance. The alloy was vacuum sintered in different conditions of time and temperature. The density and microstructure (designating phase distribution) are evaluated. Corrosion resistance through el