## Abstract ## Background and Objectives In vitro studies have shown that CO~2~ lasers operating at the highly absorbed 9.3 and 9.6βΒ΅m wavelengths with a pulse duration in the range of 10β20βmicrosecond are well suited for the efficient ablation of enamel and dentin with minimal peripheral thermal
Effects of heterogeneous absorption of laser radiation in biotissue ablation: Characterization of ablation of fat with a pulsed CO2 laser
β Scribed by Ross, E. Victor; Domankevitz, Yacov; Anderson, R. Rox
- Publisher
- John Wiley and Sons
- Year
- 1997
- Tongue
- English
- Weight
- 78 KB
- Volume
- 21
- Category
- Article
- ISSN
- 0196-8092
No coin nor oath required. For personal study only.
β¦ Synopsis
Background and Objective: Physicians encounter several clinical situations in which fat must be removed. In this study, the characterization of fat ablation produced by a pulsed CO 2 laser is reported. Study Design/Materials and Methods: An RF excited 800 s pulsed CO 2 laser operating at 10.6 m was used to ablate fresh porcine fat. The heat of ablation and ablation threshold were determined using a mass loss technique. Absorption coefficients for fat and dermis were determined by attenuated total reflection spectroscopy. Results: Threshold radiant exposure and heat of ablation for fat were calculated from the mass loss measurements to be 1.05 J/cm 2 and 2.4 J/cm 3 , respectively. The absorption coefficients of fat and dermis at 10.6 m were 250 and 780 cm -1 , respectively. Pulsed CO 2 laser ablation of fat caused ejection of fat droplets, which ignited after high fluence pulses. Conclusion: A pulsed CO 2 laser can effectively ablate fat with a threshold fluence and efficiency comparable to other soft tissues. Our data suggest that fat ablation occurs primarily through the ejection of intact fat particles via the explosive vaporization of intervening water ''lakes.'' Lasers Surg. Med. 21:59-64, 1997.
π SIMILAR VOLUMES
A pulsed holmium laser transmitted through a quartz fiber was used to create osteotomies in the facial bones and sinuses of rabbits. The ablation process was quantified and residual thermal injury was assessed by light microscopy. Adjacent thermal damage was determined to vary between 130 and 220 pm
Background and Objectiues: Resurfacing with the CO, laser is rapidly gaining acceptance for skin rejuvenation. Advances in C02 laser and scanning technology allow for precise tissue removal with minimal thermal damage. High energy CO, laser pulses have been widely used effectively to smooth the surf
## Abstract A pulsed Er:YAG laser at 2.94 ΞΌm and a superpulsed CO~2~ laser at 10.6 ΞΌm are used to investigate bone ablation applications in otolaryngology. Quantitative measurements of mass removal and the ablation depth of cat skull bone and rat femur are presented with the Er:YAG laser at fluence
Background and Objectives: Previous studies have demonstrated that lasers can be used to modify the chemical composition of dental enamel to render the mineral phase more resistant to acid dissolution with minimal peripheral thermal damage. Transverse excited atmospheric (TEA) CO 2 lasers tuned to t
## Abstract For Abstract see ChemInform Abstract in Full Text.