✦ LIBER ✦

Effects of Fabrication Parameters on Interface of Zirconia and Ti-6Al-4V Joints Using Zr55Cu30Al10Ni5Amorphous Filler

✍ Scribed by Yuhua Liu, Jiandong Hu, Ping Shen…

Book ID: 120946469
Publisher: Springer US
Year: 2013
Tongue: English
Weight: 694 KB
Volume: 22
Category: Article
ISSN: 1059-9495
DOI: 10.1007/s11665-013-0534-y

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effects of plastic deformation and hydro

Effects of plastic deformation and hydrogen charging on the internal friction in bulk and ribbon metallic glasses Zr52.5Cu17.9Ni14.6Al10Ti5 and Pd40Cu30Ni10P20

✍ Eggers, M.; Sinning, H.-R.; Khonik, V.A.; Neuhäuser, H. 📂 Article 📅 2007 🏛 Cambridge University Press 🌐 English ⚖ 476 KB

Effects of electrolytic hydrogenating pa

Effects of electrolytic hydrogenating parameters on structure and composition of surface hydrides of CP-Ti and Ti–6Al–4V alloy

✍ Tair-I Wu; Jiann-Kuo Wu 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 182 KB

Fabrication and characteristics of ta-C

Fabrication and characteristics of ta-C biomaterial coatings on Ti–6Al–4V using metal plasma immersion ion implantation and deposition

✍ H.H. Tong; O.R. Monteiro; R.A. MacGill; I.G. Brown; G.F. Yin; J.M. Luo 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 182 KB

Effects of cathodic charging and subsequ

Effects of cathodic charging and subsequent solution treating parameters on the hydrogen redistribution and surface hardening of Ti–6Al–4V alloy

✍ Tair-I. Wu; Jih-Cheng Wu 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 938 KB

Measurement and control of interface str

Measurement and control of interface strength of RF magnetron-sputtered Ca-PO coatings on Ti-6Al-4V substrates using a laser spallation technique

✍ van Dijk, K. ;Gupta, V. ;Yu, A. K. ;Jansen, J. A. 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 617 KB

In previous studies, an RF magnetron sputter technique was developed for the production of thin calcium phosphate coating. Several deposition parameters were found to influence the growth rate and the stoichiometry of the coatings. For instance, deposition with additional oxygen pressure decreased t