𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effects of extensive circumferential periosteal stripping on the microstructure and mechanical properties of the murine femoral cortex

✍ Scribed by Andrew D. Mercurio; Tatiana Motta; Eric Green; Garrett Noble; Richard T. Hart; Matthew J. Allen


Publisher
Elsevier Science
Year
2011
Tongue
English
Weight
218 KB
Volume
30
Category
Article
ISSN
0736-0266

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

Extensive periosteal stripping (PS) is a risk factor for post‐radiation pathologic fracture following surgery for extremity soft tissue tumors. The purpose of this study was to determine the effects of PS on bone structure and mechanical properties. Thirty‐one skeletally mature mice underwent PS, with circumferential removal of periosteum from an 8‐mm segment of the mid‐diaphysis of the left femur. Thirty‐one control mice underwent sham surgery in which the femur was isolated without manipulation of the periosteum. At 2, 6, 12, or 26 weeks following surgery, the left femora were examined by micro‐CT to quantify cortical thickness (CtTh), cross‐sectional area (CSA), bone volume (BV), and polar moment of inertia (PMI). Three‐point mechanical bend testing was performed and peak load, stiffness, and energy to failure were determined. PS resulted in significantly decreased CtTh, CSA, BV, and PMI at all time points. Peak load, stiffness, and energy to failure were significantly reduced at 2, 6, and 12 weeks. There were no significant differences in mechanical properties at 26 weeks. In this mouse model, extensive circumferential PS resulted in sustained changes in bone structure that were still evident after 6 months, accompanied by reductions in bone strength that persisted for at least 3 months. © 2011 Orthopaedic Research Society. © 2011 Orthopaedic Research Society Published by Wiley Periodicals, Inc. J Orthop Res 30:561–568, 2012


📜 SIMILAR VOLUMES


The effect of shear forces on the micros
✍ Tak-keun Oh; Mervat Hassan; Charles Beatty; Hassan El-Shall 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 790 KB

## Abstract The objective of this work is to understand the effect of shear force on the properties of epoxy–clay nanocomposites. The shear force was controlled by changing the revolutions per minute on a mechanical mixer. Differences in the aspect ratio of clay layers and differences of clay parti