๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Effects of electroplating on the mechanical properties of injection molded thermoplastics

โœ Scribed by Kulkarni, Mithun V.; Elangovan, K.; Hemachandra, Reddy K.

Book ID
121609164
Publisher
Springer-Verlag
Year
2013
Tongue
English
Weight
610 KB
Volume
17
Category
Article
ISSN
0972-656X

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

Effect of Processing Parameters on the M
Effect of Processing Parameters on the Mechanical Properties of Injection Molded Thermoplastic Polyolefin (TPO) Cellular Foams
โœ Steven Wong; John W. S. Lee; Hani E. Naguib; Chul B. Park ๐Ÿ“‚ Article ๐Ÿ“… 2008 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 356 KB ๐Ÿ‘ 1 views

## Abstract In this study, the effects of processing parameters on the mechanical properties of injection molded thermoplastic polyolefin (TPO) foams are investigated. Closed cell TPO foams were prepared by injection molding process. The microstructure of these foamed samples was controlled by care

Mechanical Properties of Injection Molde
Mechanical Properties of Injection Molded B4Cโ€“C Ceramics
โœ Karl A. Schwetz; Lorenz S. Sigl; Lothar Pfau ๐Ÿ“‚ Article ๐Ÿ“… 1997 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 784 KB

Various mechanical properties of carbon-doped boron carbide ceramics, prepared by the fabrication route, injection molding/ pressureless sintering/post-hot isostatic pressing (HIP) were investigated as a function of the sintering temperature and the carbon additive level used. An optimum combination