✦ LIBER ✦

Effects of crosslink density on mechanical properties of high glass transition temperature polycyanurate networks

✍ Scribed by Olivier Georjon; Jocelyne Galy

Publisher: John Wiley and Sons
Year: 1997
Tongue: English
Weight: 218 KB
Volume: 65
Category: Article
ISSN: 0021-8995
DOI: 10.1002/(sici)1097-4628(19970919)65:12<2471::aid-app18>3.0.co;2-3

No coin nor oath required. For personal study only.

✦ Synopsis

Polycyanurate networks of different architecture were synthesized using different curing cycles. Networks with a variable extent of reaction were obtained; the small variation of the cyanate conversion (0.8 to 1) corresponds to a large variation of glass transition temperature (150-290ЊC) and crosslink density. The mechanical behavior at small and large deformations and the fracture toughness were examined at room temperature and related to the network structural parameters. To explain the puzzling variation of the yield stress and yield strain with the cyanate conversion, recovery experiments were conducted to discriminate anelastic deformation from plastic deformation.

📜 SIMILAR VOLUMES

Mechanical properties of films prepared

Mechanical properties of films prepared from model high-glass-transition-temperature/low-glass-transition-temperature latex blends

✍ Jiansheng Tang; Eric S. Daniels; Victoria L. Dimonie; Menas S. Vratsanos; Andrew 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 400 KB 👁 1 views

Effects of glass-transition temperature

Effects of glass-transition temperature on properties of photorefractive polymer composite

✍ Shuizhu Wu; Fang Zeng; Fengxian Li; Yinlan Zhu; Heping Zhao 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 109 KB 👁 1 views

In this study, photorefractive polymer composites were developed in which polycarbonate was doped with a dual-function dopant and a photocharge generation sensitizer. The dual-function dopant has the function of providing both charge transport and optical nonlinearity. The composites' photoconductiv

Moisture-induced effects on the tensile

Moisture-induced effects on the tensile mechanical properties and glass-transition temperature of poly(vinyl alcohol) films

✍ M. V. Konidari; K. G. Papadokostaki; M. Sanopoulou 📂 Article 📅 2011 🏛 John Wiley and Sons 🌐 English ⚖ 110 KB

Effect of crosslinking on mechanical and

Effect of crosslinking on mechanical and viscoelastic properties of semiinterpenetrating polymer networks composed of poly(vinyl chloride) and isocyanate crosslinked networks

✍ X. Xu; L. Wang; H. Toghiani; C. U. Pittman Jr. 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 168 KB 👁 2 views

Semiinterpenetrating polymer networks (SIPNs) of PVC/isocyanate/polytriol were prepared by premixing small (150 m dia.) porous (30% voids) unplasticized PVC particles, 10% by weight of isocyanate, and a triol at different OH/NCO mol ratios. Three types of isocyanates (methylene bis-phenyl diisocyana

Effects of reactive low-profile additive

Effects of reactive low-profile additives on the properties of cured unsaturated polyester resins. II. Glass-transition temperature and mechanical properties

✍ Jyh-Ping Dong; Jeng-Huei Lee; Duen-Horng Lai; Yan-Jyi Huang 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 158 KB

## Abstract The effects of reactive poly(methyl methacrylate) (PMMA) and poly(vinyl acetate)‐__block__‐poly(methyl methacrylate) (PVAc‐__b__‐PMMA) as low‐profile additives (LPAs) on the glass‐transition temperature and mechanical properties of low‐shrink unsaturated polyester resin (UP) were invest

Effect of glycerol on solution propertie

Effect of glycerol on solution properties governing morphology, glass transition temperature, and tensile properties of electrospun zein film

✍ Saowakon Wongsasulak; Paranat Tongsin; Narupol Intasanta; Tipaporn Yoovidhya 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 484 KB

## Abstract An attempt was made to improve the tensile strength and elongation of electrospun zein film by addition of a plasticizer, namely, glycerol to the film forming solution. A surfactant viz. Tween®40 and NaCl were also added into the film solution to facilitate the electrospinning process.