## Abstract In this work, polypropylene/clay nanocomposites with 0.5, 1, 3, and 5 wt % of montmorillonite (MMT) (unmodified clay) were prepared by intensive mixing at 50 rpm and 10 min of mixing. For the highest clay content (5 wt %), the initial materials or the processing conditions were changed
Effects of clay contents on the dynamic mechanical and rheological properties of polypropylene/MAH-g-POE/clay composites
โ Scribed by Xiuying Qiao; Weixia Zhong; Kang Sun; Xiaodong Chen
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 373 KB
- Volume
- 114
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
## Abstract Full exfoliation of clay/high density polyethylene (HDPE) nanocomposites was successfully achieved with the aid of maleated HDPE (PEโ__g__โMAn), by melt blending in a twinโscrew extruder employing a long residence time configuration. The morphology of the composites was determined using
## Abstract A commercial clay, Cloisiteยฎ20A (C20A) was modified with three different silane compounds, propyltrimethoxy silane, octyltrimethoxy silane, and octadecyltrimethoxy silane, to control the hydrophobicity of C20A. The amount of the silane compounds grafted to C20A was quantified from the w