✦ LIBER ✦

Effects of changes in strain rate and test temperature on Mg85Ca5Cu10 metallic glass ribbons

✍ Scribed by Lisa A. Deibler; John J. Lewandowski

Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 1015 KB
Volume: 527
Category: Article
ISSN: 0921-5093
DOI: 10.1016/j.msea.2009.11.062

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Tensile test on in situ solidified notch

Tensile test on in situ solidified notched specimens: effects of temperature history and strain rate on the hot ductility of Nb and NbV microalloyed steels

✍ P. Deprez; J.P. Bricout; J. Oudin 📂 Article 📅 1993 🏛 Elsevier Science 🌐 English ⚖ 835 KB

Hot steel ductility in continuous casting processes is determined by tensile tests of notched cylindrical specimens which are obtained by melting and solidification and then tested after rate-controlled cooling with a new specific device available for any standard test machine. Hot ductility is prop

Effects of temperature and strain rate o

Effects of temperature and strain rate on transverse tensile properties of H4LM graphite tested in helium and in vacuum

✍ Morton C Smith 📂 Article 📅 1964 🏛 Elsevier Science 🌐 English ⚖ 716 KB

Curves are presented showing the ultimate tensile strength of molded H4LM graphite in the transverse orientation ("with the grain") as a function of temperature, for tests made in vacuum and in static helium at nominal engineering strain rates of 0.005, 0.5 and 2.0/min. Temperature ranges considered

Effects of Changes in Notch Radius and T

Effects of Changes in Notch Radius and Test Temperature on the Toughness of a Nano-crystalline Aluminum Alloy Composite Produced via Extrusion of Amorphous Aluminum Alloy Powders

✍ Hala A. Hassan; John. J. Lewandowski 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 402 KB