𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effects of boronizing on mechanical and dry-sliding wear properties of CoCrMo alloy

✍ Scribed by Dong Mu; Bao-luo Shen; Xin Zhao

Publisher
Elsevier Science
Year
2010
Weight
496 KB
Volume
31
Category
Article
ISSN
0261-3069

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Effect of Si content on the dry sliding
Effect of Si content on the dry sliding wear properties of spray-deposited Al–Si alloy
✍ Feng Wang; Huimin Liu; Yajun Ma; Yuansheng Jin πŸ“‚ Article πŸ“… 2004 πŸ› Elsevier Science βš– 585 KB

In the present investigation, Al-12Si, Al-20Si and Al-25Si (wt%) alloys were synthesized by spray atomization and deposition technique. The wear resistance of the alloys was studied using a pin-on-disc machine under four loads, namely 8.9, 17.8, 26.7 and 35.6 N. The microstructures, worn surfaces an

Effect of microstructure on the dry slid
Effect of microstructure on the dry sliding friction behavior of CoCrMo alloys used in metal-on-metal hip implants
✍ R. Varano; J. D. Bobyn; J. B. Medley; S. Yue πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 244 KB

## Abstract The microstructure and its effect on the friction behavior of a medical grade wrought cobalt–chromium–molybdenum (CoCrMo) alloy for surgical implants were studied in this work. In particular, the effects of compression and carbon (C) content on the above characteristics were analyzed. I

The effects of induction hardening on we
The effects of induction hardening on wear properties of AISI 4140 steel in dry sliding conditions
✍ Y Totik; R Sadeler; H Altun; M Gavgali πŸ“‚ Article πŸ“… 2003 πŸ› Elsevier Science βš– 965 KB

Wear behaviour of induction hardened AISI 4140 steel was evaluated under dry sliding conditions. Specimens were induction hardened at 1000 Hz for 6, 10, 14, 18, 27 s, respectively, in the inductor which was a three-turn coil with a coupling distance of 2.8 mm. Normalised and induction hardened speci