Effects of anaerobe in sea bottom sediment on the corrosion of carbon steel
β Scribed by Y. Huang; J. Duan; S. Ma
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- German
- Weight
- 112 KB
- Volume
- 55
- Category
- Article
- ISSN
- 0947-5117
No coin nor oath required. For personal study only.
β¦ Synopsis
Abstract
The inβsitu study of steel corrosion in sea bottom sediment (SBS) was carried out by Transplanting Burying Plate method (TBP method). It was found that the corrosion rate of steel in the sea bottom sediment with sulfate reducing bacteria (SRB) could be as high as ten times of that in sea bottom sediment without SRB. The experiments in simulated sea bottom sediments with different SRB contents by artificial culturing showed that the electrochemical behavior of steel in the sea bottom sediment with SRB was different from that without SRB. SRB altered the polarization behavior of steel significantly. The environment was acidified due to the activity of SRB and the corrosion of steel was accelerated. The corrosion of carbon steel in sea bottom sediment is anaerobic corrosion, and the main factor is anaerobe. There are SRB commonly in SBS, and the amount of SRB decreases along with the depth of sediment. Because of the asymmetry and variation of sea bottom sediment, the most dangerous corrosion breakage of steel in SBS is local corrosion caused by SRB. So the main countermeasure of corrosion protection of sea bottom steel facilities should be controlling of the corrosion caused by anaerobe.
π SIMILAR VOLUMES
Electrochemical technologies, chemical immersion tests and surface detection technologies were adopted to study the inhibition performance of Na 3 PW 12 O 40 inhibitor on carbon steel in 55 % LiBr ΓΎ 0.07 mol/L LiOH solution, and the inhibition mechanism was discussed. Results indicated that Na 3 PW
## Abstract The effect of some synthesized pyrazolo containing compounds on the corrosion of carbon steel in 1 M H~2~SO~4~ was investigated. The investigation involved electrochemical polarization methods (potentiodynamic, Tafel extrapolation and the determination of the polarization resistance). A
## Abstract Tannins and pH are often cited as factors that affect the corrosiveness of wood yet there are few data to confirm these statements. The purpose of this paper is to systematically investigate the effect of tannins and pH on corrosion of metals in wood. Four wood species known to vary in
## Abstract In this study, the effects of various formwork surfaces on the corrosion performance of reinforcing steel in concrete were examined. For this purpose, seven formwork surfaces from populus nigra, pinus silvestris, steel sheet, and four of plywoods were prepared. Three of the plywood form
## Abstract The effect of chromate (${\rm CrO}\_4^{2 - }$) and molybdate (${\rm MoO}\_4^{2 - }$) ions on the corrosion of carbon steel in 0.5 M NaCl solution has been studied using electrochemical measurements and atomic force microscopy (AFM) technique. Potentiodynamic polarization data suggest th