𝔖 Bobbio Scriptorium
✦   LIBER   ✦

EFFECTS OF AIR AND INERT ENVIRONMENTS ON THE NEAR THRESHOLD FATIGUE CRACK GROWTH BEHAVIOR OF ALLOY 718

✍ Scribed by J. L. Yuen; C. G. Schmidt; P. Roy

Book ID
109012040
Publisher
John Wiley and Sons
Year
1985
Tongue
English
Weight
774 KB
Volume
8
Category
Article
ISSN
8756-758X

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The effects of environment and loading w
The effects of environment and loading waveform on fatigue crack growth in Inconel 718
✍ M.R Bache; W.J Evans; M.C Hardy πŸ“‚ Article πŸ“… 1999 πŸ› Elsevier Science 🌐 English βš– 950 KB

The influence of environment and fatigue waveform shape on crack growth behaviour has been evaluated in a workhorse turbine disc material, Inconel 718, at 600Β°C through an experimental programme that investigated crack growth from a notch geometry. Crack growth data are presented for a variety of st

Effects of Loading Waveform and Stress F
Effects of Loading Waveform and Stress Field on High Temperature Fatigue Crack Growth of Alloy 718
✍ P. Heuler; E. Affeldt; R.J.H. Wanhill πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 English βš– 325 KB

## Abstract High temperature fatigue in nickel‐base superalloys for aero‐engine applications requires consideration of cycle‐ and time‐dependent phenomena. For waveforms with dwells and/or low frequencies crack growth rates may be significantly accelerated up to the point of fully time‐dependent cr

Effect of hold time and environment on F
Effect of hold time and environment on Fatigue Crack Growth Rate in Ti Alloys
✍ Dr. D. Munz; V. Bachmann πŸ“‚ Article πŸ“… 1980 πŸ› John Wiley and Sons 🌐 English βš– 491 KB

## Abstract In titanium alloys an effect of hold time at maximum load in a cyclic test is observed if K~max~ exceeds the threshold for crack propagation at a constant load test. For tests in air it is possible to predict crack growth rate for a hold time cycle from the crack growth rates from a cyc