Effects of additives on alumina sheets forming by a novel gel-tape-casting
β Scribed by Zhi-Peng Xie; Chun-Lei Ma; Yong Huang
- Publisher
- Elsevier Science
- Year
- 2003
- Weight
- 885 KB
- Volume
- 24
- Category
- Article
- ISSN
- 0261-3069
No coin nor oath required. For personal study only.
β¦ Synopsis
The influences of various additives in the slurry on the process of gel-tape-casting were studied. Alumina powder dispersion can be improved by dispersants, and a solids loading of more than 55 vol.% can be reached by using effective dispersant. With the help of plasticizer, the green tape can be bent without cracks. A proper surfactant is employed to reduce the contact angle of slurry on the carrier film and improve wetting. Foams in slurry resulting from the surfactant can be effectively eliminated using defoamer. A green tape with high strength, flexibility and smooth surface has been obtained.
π SIMILAR VOLUMES
AI-AI2Q composites containing 0.48%-6.8% Mg in the matrix alloys have been fabricated by pressure infiltration casting. Optical microscopy, scanning electron microscopy and image analysis were used to examine and to analyze the details of the microstructure and the fracture surface. Tensile tests we
An investigation was carried out to examine the influence of a novel two-step austempering process on microstructural parameters and the abrasion wear resistance of austempered ductile cast iron (ADI). Two batches of cylindrical pin specimens were prepared from an alloyed nodular ductile cast iron a
## Abstract ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a βFull Textβ option. The original article is trackable v