✦ LIBER ✦

Effects of ABS-g-MAH on mechanical properties and compatibility of ABS/PC alloy

✍ Scribed by Xiangfu Zhang; Yusheng Chen; Yong Zhang; Zonglin Peng; Yinxi Zhang; Wen Zhou

Publisher: John Wiley and Sons
Year: 2001
Tongue: English
Weight: 199 KB
Volume: 81
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.1502

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Study of compatibility, morphology struc

Study of compatibility, morphology structure and mechanical properties of CPVC/ABS blends

✍ Li-Xin Zhang; Chao Zhou; Shu-Lin Sun; Liang Ren; Xiao-Lin Ma; Ming-Yao Zhang; Hu 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 357 KB 👁 1 views

Effects of acrylonitrile content on PC/A

Effects of acrylonitrile content on PC/ABS alloy systems with a flame retardant

✍ H. J. Choi; S. H. Park; J. K. Kim; J. I. Jun 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 219 KB 👁 1 views

To investigate the effect of a flame retardant on PC/ABS alloy systems, a reactive-type brominated epoxy resin was used as a flame retardant, and mixed with PC/ABS at various amount using a twin-screw extruder. The rheological, morphological, mechanical, and thermal properties were investigated as a

Effect of the compatibilizers on flame-r

Effect of the compatibilizers on flame-retardant polycarbonate (PC)/acrylonitrile–butadiene–styrene (ABS) alloy

✍ Wen-Yen Chiang; Gwo-Long Tzeng 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 332 KB 👁 1 views

Polycarbonate (PC) blended with acrylonitrile-butadiene-styrene (ABS) has the maximum notched Izod impact strength, which is 58 kg cm cm 01 for PC/ABS1 and 66 kg cm cm 01 for PC/ABS2, at a ratio of 80/20 in this study. We selected the ratio of 80/20 to prepare flame-retardant PC/ABS alloys. The comp

Morphological and mechanical properties

Morphological and mechanical properties of PP/ABS blends compatibilized with PP-g-acrylic acid

✍ Alpesh C. Patel; Ragesh B. Brahmbhatt; B. D. Sarawade; Surekha Devi 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 408 KB 👁 2 views

Mechanical properties and morphology of

Mechanical properties and morphology of PP/ABS blends compatibilized with PP-g-2-HEMA

✍ Alpesh C. Patel; Ragesh B. Brahmbhatt; Surekha Devi 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 287 KB 👁 1 views

Effect of melting temperature, coupling

Effect of melting temperature, coupling agent, and width on properties of ABS+20%PC/al flake-metallized plastics

✍ C.B. Lin; Chien-Yun Chen; Chi-Yuan Feng 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 350 KB 👁 1 views

Effects of different melting temperatures (270 and 210°C), Al flake widths (0.5 and 0.8 mm), and coupling agents (gamma aminopropyl triethoxy silane A1100 and gamma glycidoxy propyl trimethoxy silane A-187) on the properties of ABSϩ20%PC/Al flake-metallized plastics are discussed. According to exper