Effectiveness of nitric oxide ozonation

✍ Scribed by Kinga Skalska; Jacek S. Miller; Stanisław Ledakowicz

• Book ID: 111491418
• Publisher: Versita
• Year: 2011
• Tongue: English
• Weight: 242 KB
• Volume: 65
• Category: Article
• ISSN: 0366-6352
• DOI: 10.2478/s11696-010-0082-y

✦ Synopsis

Abstract

Attempts to develop new technologies of NOx (NO + NO2) emission reduction are still carried out all around the world. One of the relatively new approaches is the application of ozone injection into the exhaust gas stream followed by the absorption process. Ozone is used to transform NOx to higher nitrogen oxides which yield nitric acid with better effectiveness. The main objective of this paper was to study the influence of mole ratio (MR) O3/NO used in the ozonation process of NOx on the effectiveness of NOx oxidation to higher oxides. The ozonation process was carried out in a flow reactor for concentrations of nitric oxide in the range of 1.5 × 10−5−7.7 × 10−5 mol dm−3 and varying O3/NO mole ratios. Measurements were conducted with the use of a FTIR spectrometer. The results obtained prove that for MR higher than 1, the oxidation effectiveness of nitric oxides generally reaches 95 %, whereas for MR higher than 2, oxidation of NOx to higher nitrogen oxides is completed.