✦ LIBER ✦

Effective Thermal Conductivity of Polymer Composites

✍ Scribed by R. Singh; P. Sharma

Publisher: John Wiley and Sons
Year: 2008
Tongue: English
Weight: 135 KB
Volume: 10
Category: Article
ISSN: 1438-1656
DOI: 10.1002/adem.200700336

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effective thermal conductivity of three-

Effective thermal conductivity of three-phase styrene butadiene composites

✍ Richa Agrawal; N. S. Saxena; G. Mathew; S. Thomas; Kanan B. Sharma 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 136 KB 👁 1 views

Transient plane source technique was used for the simultaneous measurement of thermal conductivity and thermal diffisivity of three-phase styrene butadiene rubber composites. Two series of styrene butadiene rubber composites were studied, having natural rubber as a variable filler in both the compos

Thermally conductive polymer composites

Thermally conductive polymer composites for electronic packaging

✍ X. Lu; G. Xu 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 152 KB 👁 1 views

Polyurethane composites filled with alumina or carbon fibers were prepared to study the thermal conductivities and dielectric properties of polymer composites under humid environments. The thermal conductivities of these polymer composites in relation to filler concentrations and filler sizes were i

Preparation of conducting polymer compos

Preparation of conducting polymer composites: effects of porosity on electrical conductivity

✍ Son, Suk-Hye; Lee, Hae-Joon; Park, Young-Jun; Kim, Jung-Hyun 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 230 KB 👁 2 views

To prepare conducting polymer composites, porous polymethyl methacrylate (PMMA) particles with di †erent speciÐc surface areas were prepared by seeded emulsion polymerization and solvent extraction. The dried porous particles were imbibed with the oxidant solution and adsorbed pyrrole from a solutio

Moisture–absorption, dielectric relaxati

Moisture–absorption, dielectric relaxation, and thermal conductivity studies of polymer composites

✍ Xin Lu; Gu Xu; Peter G. Hofstra; Robert C. Bajcar 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 165 KB 👁 1 views

In the search for new packaging materials for the electrical/electronics industry, three types of polymer composites have been studied. Silicone/boron nitride powders, polyurethane/alumina powders, and polyurethane/carbon fibers have all been synthesized to study the moisture-absorption kinetics, th

Thermal conductivity and heat capacity o

Thermal conductivity and heat capacity of ABS resin composites

✍ Ryosuke Tsukuda; S. Sumimoto; Takeo Ozawa 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 168 KB 👁 1 views

Thermal conductivity and heat capacity of composites of ABS resin with glass beads and/or titania were measured. For ABS-glass-beads composites, the thermal conductivity data are in good agreement with values calculated by the Maxwell and Bruggeman equations in a temperature range above a critical t

Effects of mechanical deformations on th

Effects of mechanical deformations on the structurization and electric conductivity of electric conducting polymer composites

✍ J. N. Aneli; G. E. Zaikov; L. M. Khananashvili 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 474 KB 👁 2 views

Structural changes proceeding in composites under the effect of various mechanical deformations (stretching, compression, shear, etc.) affect the structure of an electrical conducting system. Mechanical stresses, induced by deformation of composite materials during deformation, affect both the molec