The effects of g-irradiation were measured in a HDPE and in the resin after it was recrystallized. The fracture mode of the initial material transformed from crazing to complete brittle failure at a critical dose. The failure mode of the recrystallized material transformed from crazing to shear defo
Effect of γ-irradiation on slow crack growth in a copolymer of polyethylene
✍ Scribed by Xici Lu; Norman Brown; Manal Shaker
- Publisher
- John Wiley and Sons
- Year
- 1998
- Tongue
- English
- Weight
- 411 KB
- Volume
- 36
- Category
- Article
- ISSN
- 0887-6266
No coin nor oath required. For personal study only.
✦ Synopsis
The effect of ␥-irradiation on slow crack growth (SCG) in a medium density polyethylene (MDPE) was measured and compared with behavior of high density polyethylene (HDPE) and a recrystallized HDPE (RCHDPE). The three materials exhibited the same dependence on dose up to 3 Mrd. The HDPE became brittle above 50 Mrd. The resistance to SCG of MDPE and RCHDPE increased very rapidly with dose above 3 Mrd, until at 50 -80 Mrd their resistance to SCG became extraordinarily high. This high resistance to SCG was accompanied by a transition from crazing to shear deformation at the root of a notch. It was found that for the same concentration, crosslinks are more effective than short chain branches for increasing resistance to SCG.
📜 SIMILAR VOLUMES
## Abstract Polyolefins, particularly polyethylene, are known to fail via crack initiation and crack propagation when exposed to multiaxial long‐term static stresses at elevated temperatures. Using concepts of linear elastic fracture mechanics, this article describes and discusses the effects of st
An optical microscopy study and a micro-Raman spectroscopy study were carried out on polyethylene samples subjected to an environmental stress crack resistance (ESCR) test. The aim was to elucidate the molecular deformation mechanisms associated with the failure process. It has been shown that in th