𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of Zn on the microstructure and mechanical properties of Mg–Si alloy

✍ Scribed by Erlin Zhang; Xushu Wei; Lei Yang; Jianwei Xu; Chunmei Song


Publisher
Elsevier Science
Year
2010
Tongue
English
Weight
903 KB
Volume
527
Category
Article
ISSN
0921-5093

No coin nor oath required. For personal study only.

✦ Synopsis


Microstructure and mechanical properties of Mg-0.6Si-xZn alloys (x = 0-1.6 wt%) were investigated to reveal the modification effect of Zn on the morphology of eutectic Mg 2 Si. It was found 0.5-1.3 wt% Zn effectively modified the morphology of eutectic Mg 2 Si from laminated structure to fine fiber, and in turn improved significantly the mechanical properties of Mg-Si alloy. Further increase in Zn content changed Mg 2 Si from fine fiber to Chinese script shape. It was suggested that the Zn content should not exceed 1.5 wt% in Mg-Si-Zn alloy in order to get good mechanical properties.


📜 SIMILAR VOLUMES


Microstructure, mechanical properties an
✍ Erlin Zhang; Lei Yang; Jianwei Xu; Haiyan Chen 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 506 KB

Mg-Si alloy was investigated for biomedical application due to the biological function of Si in the human body. However, Mg-Si alloy showed a low ductility due to the presence of coarse Mg(2)Si. Ca and Zn elements were used to refine and modify the morphology of Mg(2)Si in order to improve the corro

Effects of yttrium on microstructure and
✍ Ya Zhang; Xiaoqin Zeng; Liufa Liu; Chen Lu; Hantao Zhou; Qiang Li; Yanping Zhu 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 924 KB

This article studied the effects of yttrium on microstructure and mechanical properties of extruded Mg–Zn–Y–Zr alloys. Three kinds of Mg–5.5Zn–xY–0.4Zr alloys with variable yttrium content were hot-extruded at different temperature to investigate the microstructure evolution and dynamic recrystalliz

Effects of Sn and Ca additions on micros
✍ C. Jihua; C. Zhenhua; Y. Hongge; Z. Fuquan; C. Yingliang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 German ⚖ 972 KB

## Abstract Effects of Sn and Ca additions on microstructure, mechanical properties, and corrosion resistance of the as‐cast Mg‐6Zn‐2Al‐based alloy were investigated by SEM, XRD, tensile tests, electrochemical measurements, etc. The higher the Sn content, the higher the yield strength of the Mg‐6Zn