𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of water on the glass transition temperature of hydrophilic polyurethanes

✍ Scribed by Nathaniel S. Schneider; Joyce L. Illinger; Frank E. Karasz


Publisher
John Wiley and Sons
Year
1993
Tongue
English
Weight
547 KB
Volume
48
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis


The depression of the glass transition temperature by water was studied in a set of polyurethanes in which the soft segment consisted of polyethylene oxide (sample I ) or a block copolymer of poly (propylene oxide) terminated with poly (ethylene oxide) in various proportions (sample set 11). DSC measurements were made at two added water contents for each type of sample and at various temperatures. The Tg reduction appeared to be governed solely by the nonfreezing bound water and was much larger in sample I than in samples of set 11. The more limited effect on the Tg of set I1 samples is attributed to restricted mobility arising from coupling of the short terminal poly( ethylene oxide) to rigid hardsegment units. Therefore, the data for sample I are preferred as a test of the predictive relations for the Tg depression. On this basis, it appears that the simple Fox mixing equation is more reliable than is the available free volume approach, which required unrealistically high values of the thermal expansion coefficient for water to fit the data for sample I.


πŸ“œ SIMILAR VOLUMES


The effect of water on the glass transit
✍ F.-J. Wortmann; M. Stapels; R. Elliott; L. Chandra πŸ“‚ Article πŸ“… 2006 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 136 KB πŸ‘ 2 views

## Abstract The glass transition of human hair and its dependence on water content were determined by means of differential scanning calorimetry (DSC). The relationship between the data is suitably described by the Fox equation, yielding for human hair a glass transition temperature of __T__~g~ = 1

Effect of Thermal Degradation on Glass T
✍ Katrin Wondraczek; JΓΆrg Adams; JΓΌrgen Fuhrmann πŸ“‚ Article πŸ“… 2004 πŸ› John Wiley and Sons 🌐 English βš– 101 KB

## Abstract **Summary:** For industrial polymer applications, the structure‐property relation during thermal treatment is of high interest. If a polymer is degraded, its molecular structure will alter, and its mechanical properties are affected as well; thus limiting the usability. The objective of