✦ LIBER ✦

Effect of V content on the microstructure and mechanical properties of Mo2FeB2 based cermets

✍ Scribed by Haizhou Yu; Yong Zheng; Wenjun Liu; Jianzhi Zheng; Weihao Xiong

Publisher: Elsevier Science
Year: 2010
Weight: 504 KB
Volume: 31
Category: Article
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2009.11.051

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effects of Mo/B Atomic Ratio on the Mech

Effects of Mo/B Atomic Ratio on the Mechanical Properties and Structure of Mo2NiB2 Boride Base Cermets with Cr and V Additions

✍ Ken-ichi Takagi; Yuji Yamasaki 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 330 KB

The e4ects of Mo/B atomic ratio ranging from 0.8 to 1.5 (Mo contents) on mechanical properties and phase formation were studied for cermets with the composition of Ni+5.0B+xMo+ 3.5Cr+11.5V (wt%). A strong correlation between mechanical properties and phase formation was observed in the cermets. The

Microstructure and mechanical properties

Microstructure and mechanical properties of Ti-based solid-solution cermets

✍ Jiwoong Kim; Moonsu Seo; Shinhoo Kang 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 613 KB

Effect of (Ni, Mo) and TiN on the micros

Effect of (Ni, Mo) and TiN on the microstructure and mechanical properties of TiB2 ceramic tool materials

✍ Meilin Gu; Chuanzhen Huang; Bin Zou; Binqiang Liu 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 431 KB

Effect of TaC addition on the microstruc

Effect of TaC addition on the microstructures and mechanical properties of Ti(C, N)-based cermets

✍ Peng Wu; Yong Zheng; Yongle Zhao; Haizhou Yu 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 486 KB

The microstructures of the prepared Ti(C, N)-based cermets with various TaC additions were studied using X-ray diffractometry (XRD) and scanning electron microscopy (SEM). Mechanical properties such as transverse rupture strength (TRS), fracture toughness (K 1C ) and hardness (HRA) were also measure

ChemInform Abstract: Preparation, Micros

ChemInform Abstract: Preparation, Microstructure, and Mechanical Properties of TiC0.35N0.35—TiNi Cermets.

✍ L. Kh. Askarova; E. V. Shchipachev; I. G. Grigorov; Yu. G. Zainulin 📂 Article 📅 2001 🏛 John Wiley and Sons ⚖ 30 KB

Effect of nitrogen on the microstructure

Effect of nitrogen on the microstructure and mechanical properties of a CoCrMo alloy

✍ José Escobedo; Juan Méndez; Dora Cortés; Juan Gómez; Manuel Méndez; Héctor Manch 📂 Article 📅 1996 🏛 Elsevier Science ⚖ 912 KB

The effect of nitrogen on the microstructure and mechanical properties of a cobalt base alloy was studied. The treatments were carried out for contact times of 0, 15, 30, 45 and 55 min, between the gas and the liquid metal. The treatment temperature was 1723 K at a nitrogen pressure of 0.67 atm. The