𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of titania content on the optical properties of dye-doped hybrid sol–gel coatings

✍ Scribed by Xavier Le Guével; Stefano Schutzmann; Lorenzo Stella; Fabio De Matteis; Paolo Prosposito; Mauro Casalboni

Publisher
Elsevier Science
Year
2008
Tongue
English
Weight
256 KB
Volume
31
Category
Article
ISSN
0925-3467

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of annealing temperature on optic
Effect of annealing temperature on optical properties of Er-doped ZnO films prepared by sol–gel method
✍ Fanyong Ran; Lei Miao; Sakae Tanemura; Masaki Tanemura; Yongge Cao; Shigeru Tana 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 360 KB

Using erbium acetate as an Er source, transparent ZnO films doped with Er were fabricated by sol-gel method through spin-coating on quartz substrates. The as-prepared ZnO:Er films were annealed in air at 400 • C for 6 h, at 600 • C, 800 • C and 1000 • C for 2 h, respectively. The ZnO:Er films exhibi

Effect of composition and morphology on
Effect of composition and morphology on the spectral properties and stability of dyes doped in a sol-gel glass waveguide
✍ Y. Sorek; R. Reisfeld; A.M. Weiss 📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 551 KB

Planar waveguides made of titania and organically modified silica (osmosil) and doped by laser dyes were prepared using the sol-gel method. The film structure and morphology were studied using absorption spectroscopy in the UV and by atomic force microscopy (AFM). The size of the titania nanoparticl

The effect of calcination on the corrosi
The effect of calcination on the corrosion performance of TiO2 sol–gel coatings doped with benzotriazole on steel CK45
✍ S. M. Madani; M. Ehteshamzadeh; H. H. Rafsanjani; S. S. Mansoori 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 German ⚖ 404 KB 👁 1 views

## Abstract Sol–gel method under dip coating process and tetra‐__n__‐butyle orthotitanate as precursor were used to produce titanium oxide coating on steel CK45. The effect of calcination at 400 °C, after drying at 120 °C, on the morphology and corrosion performance of the coatings was investigated