✦ LIBER ✦

Effect of thermal treatment on the crystal structure and morphology of zirconia nanopowders produced by three different routes

✍ Scribed by M.M. Rashad; H.M. Baioumy

Publisher: Elsevier Science
Year: 2008
Tongue: English
Weight: 907 KB
Volume: 195
Category: Article
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2007.04.135

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of production parameters on the s

Effect of production parameters on the structure and morphology of Ag nanopowders produced by inert gas condensation

✍ Mehmet Turker 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 570 KB

Effect of thermal conductivity and heat

Effect of thermal conductivity and heat transfer on crystallization, structure, and morphology of polypropylene containing different fillers

✍ S. Radhakrishnan; Pradip Sonawane; N. Pawaskar 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 205 KB 👁 2 views

## Abstract The crystallization behavior, structure, and morphology developed was investigated for polypropylene containing different fillers such as silica, calcium carbonate, talc, mica, graphite, etc. by using compression‐molded samples prepared at several cooling rates. It was observed that the

The effect of heat treatment process on

The effect of heat treatment process on structure and properties of ZnO nano layer produced by sol–gel method

✍ Seyyed Mohammad Hossein Hejazi; Fatemeh Majidi; Mohammad Pirhadi Tavandashti; Mo 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 758 KB

Effect of Addition of Divalent Transitio

Effect of Addition of Divalent Transition Metal Chlorides on the Structure and Thermal Stability of Lamellar Silica Synthesized by the Neutral Amine Route

✍ Robson F. de Farias; Claudio Airoldi 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 201 KB

The addition of divalent metal chlorides MCl 2 (M ‫؍‬ Mn, Co, Ni, Cu, Zn, Cd, Hg) drastically a4ects the structure and thermal stability of lamellar silica obtained through the neutral amine route using 1,12-diaminedodecane as template molecule. These changes in properties are related to the coordin

Oxygen interaction of CdS-based gas sens

Oxygen interaction of CdS-based gas sensors with different stoichiometric compositions was studied by X-ray photoelectron spectroscopy (XPS) and thermal-desorption mass spectroscopy observations combined with conductivity measurements. Three different types of film with different atomic ratios of Cd/S were used in the study of oxygen chemisorption in a low-temperature range between 300 and 570 K. Spray pyrolysis was used for the deposition of the films on glass substrates; XPS and energy dispersive spectroscopy of X-ray together with atomic force microscopy and scanning electron microscopy were used for the characterization of the composition and structure of the films. It was possible to distinguish different temperature ranges for the thermal desorption of the different adsorbed oxygen species. A comparison of the data from XPS and mass-spectroscopy observations with conductance measurements allows to conclude that metallic surface atoms are responsible for different interactions of oxygen species with CdS surfaces.

📂 Article 📅 1995 🏛 Elsevier Science 🌐 English ⚖ 379 KB