𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of the recoating and the length on fiber Bragg grating sensors embedded in polymer composites

✍ Scribed by A. Vieira; R. de Oliveira; O. Frazão; J.M. Baptista; A.T. Marques

Publisher
Elsevier Science
Year
2009
Weight
202 KB
Volume
30
Category
Article
ISSN
0261-3069

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

The fabrication and analysis of lateral
The fabrication and analysis of lateral pressure fiber sensor based on fiber Bragg grating
✍ Hsi-Shan Huang; Tsair-Chun Liang 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 285 KB

## Abstract This article mainly depicts the sensitivity of the pressure sensor based on fiber Bragg grating coated with polymers of different ratio hardener and silicone sealant. The result shows that when the ratio is 1:13, the effect of the sensitivity of 1.94 × 10^−2^/MPa can be obtained. © 2008

Influence of Cure Regime on the Strain D
Influence of Cure Regime on the Strain Development in an Epoxy Resin as Monitored by a Fiber Bragg Grating Sensor
✍ Margit Harsch; József Karger-Kocsis; Florian Herzog 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 497 KB

## Abstract In this paper, the effects of different cure regimes on the strain development in an anhydride‐cured epoxy resin were investigated by fiber optical measurements. The course of the strain signal was detected by an embedded fiber Bragg grating sensor in the unconstrainedly curing epoxy. T