𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of temperature on oxygen-argon separation on carbon molecular sieves

✍ Scribed by S.K. Verma; Y. Nakayama; P.L. Walker Jr.


Publisher
Elsevier Science
Year
1993
Tongue
English
Weight
211 KB
Volume
31
Category
Article
ISSN
0008-6223

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Effect of adsorbed water on adsorption o
✍ Motoyuki Suzuki; Hiroshi Doi πŸ“‚ Article πŸ“… 1982 πŸ› Elsevier Science 🌐 English βš– 403 KB

Adsorption equilibrium coefficients and diffusivities of oxygen and nitrogen in Molecular Sieving Carbon with 0.4 nm micropore are measured with various humidities in the carrier stream by means of chromatography. Diffusivities of both the gases decrease dramatically with small amounts of adsorbed w

Adsorption of Gases on Carbon Molecular
✍ S.N. Vyas; S.R. Patwardhan; S. Vijayalakshmi; K.Sri Ganesh πŸ“‚ Article πŸ“… 1994 πŸ› Elsevier Science 🌐 English βš– 245 KB
Air separation by pressure swing adsorpt
✍ M.M. Hassan; D.M. Ruthven; N.S. Raghavan πŸ“‚ Article πŸ“… 1986 πŸ› Elsevier Science 🌐 English βš– 938 KB

A simplitied dynamic model for a PSA air separation process is developed based on linearized mass transfer rate expressions and binary Langmuir equilibrium. Constant pressure is assumed during adsorption and desorption steps but the variation in flow rate through the column due to adsorption is aeeo

Carbon molecular sieve gas separation me
✍ Cheryl W. Jones; William J. Koros πŸ“‚ Article πŸ“… 1994 πŸ› Elsevier Science 🌐 English βš– 654 KB

Carbon molecular sieving membranes are new, high-performance materials for gas separations. The selectivities of these membranes are much higher than those typically found with polymeric materials, and the selectivities are achieved without sacrificing productivity. Ultramicroporous carbon membrane

Effect of test temperature on separation
✍ Jennings, Walter ;Yabumoto, Kan πŸ“‚ Article πŸ“… 1980 πŸ› John Wiley and Sons 🌐 English βš– 234 KB

## Abstract The separation number is affected by a variety of extra‐column factors (e.g. the injection process, the nature of the sample, and plumbing defects in the inlet and detector) as well as factors related to column efficiency. The magnitude of the separation number, as affected by the colum