Effect of tabs on impinging heat transfer

✍ Scribed by Munehiko Hiwada; Shintarou Tanaka; Kouzou Tanaka; Kenyu Oyakawa

• Publisher: John Wiley and Sons
• Year: 2001
• Tongue: English
• Weight: 175 KB
• Volume: 30
• Category: Article
• ISSN: 1099-2871
• DOI: 10.1002/htj.10002

✦ Synopsis

Abstract

The present work experimentally investigates the effect of vortex generators, in the form of small tabs projecting normally into the flow at the nozzle exit, on the fluid flow and heat transfer characteristics of an axisymmetric impinging air jet in the subcritical Reynolds number range. With this comes the expectation of a large eddy structure variation and the possibility of active control. Local heat transfer and static pressure were measured on a target plate for a round air jet issuing from a circular nozzle with rectangular tabs whose numbers and lengths changed at a constant nozzle‐to‐plate gap (L/d = 8) and jet Reynolds number (Re = 34,000). The main results are the following: When two tabs were set at the exit of the circular nozzle, Cpw and Nu profiles flatten in the direction of the tab setting. In the case of three tabs, however, among both Cpw and Nu profiles a concentric profile is found, as well as in the case without any tabs. © 2001 Scripta Technica, Heat Trans Asian Res, 30(7): 561–570, 2001