Effect of surface treatment on unalloyed titanium implants: Spectroscopic analyses

✍ Scribed by Kilpadi, D. V. ;Raikar, G. N. ;Liu, J. ;Lemons, J. E. ;Vohra, Y. ;Gregory, J. C.

• Publisher: John Wiley and Sons
• Year: 1998
• Tongue: English
• Weight: 310 KB
• Volume: 40
• Category: Article
• ISSN: 0021-9304
• DOI: 10.1002/(sici)1097-4636(19980615)40:4<646::aid-jbm17>3.0.co;2-d

✦ Synopsis

Surgical implant finishing and sterilization procedures were investigated to determine surface characteristics of unalloyed titanium (Ti). All specimens initially were cleaned with phosphoric acid and divided into five groups for comparisons of different surface treatments (C = cleaned as above, no further treatment; CP = C and passivated in nitric acid; CPS = CP and dry-heat sterilized; CPSS = CPS and resterilized; CS = C and dry-heat sterilized). Auger (AES), X-ray photoelectron (XPS), and Raman spectroscopic methods were used to examine surface compositions. The surface oxides formed by all treatments primarily were TiO 2 , with some Ti 2 O 3 and possibly TiO. Significant concentrations of carbonaceous substances also were observed. The cleaning procedure alone resulted in residual phosphorus, primarily as phosphate groups along with some hydrogen phosphates. A higher percentage of physisorbed water appeared to be associated with the phosphorus. Passivation (with HNO 3 ) alone removed phosphorus from the surface; specimens sterilized without prior passivation showed the thickest oxide and phosphorus profiles, suggesting that passivation alters the oxide characteristics either directly by altering the oxide structure or indirectly by removing moieties that alter the oxide. Raman spectroscopy showed no crystalline order in the oxide. Carbon, oxygen, phosphorus, and nitrogen presence were found to correlate with previously determined surface energy.