Nanosized magnesium aluminate materials doped by divalent cations (Ca 2+ , Ba 2+ , Sr 2+ ) and trivalent cations (Cr 3+ , Mn 3+ , Fe 3+ ) having nominal compositions Mg 1-x M x Al 2 O 4 and MgAl 2-x M x O 4 (x = 0.02-0.1), respectively, were synthesized by the sol-gel method. The samples were charac
Effect of substitution of Co2+ ions on the structural and electrical properties of nanosized magnesium aluminate
β Scribed by Javed Ahmad; Muhammad Qadeer Awan; Muhammad Ehsan Mazhar; Muhammad Naeem Ashiq
- Publisher
- Elsevier Science
- Year
- 2011
- Tongue
- English
- Weight
- 574 KB
- Volume
- 406
- Category
- Article
- ISSN
- 0921-4526
No coin nor oath required. For personal study only.
β¦ Synopsis
Cobalt substituted nanosized magnesium aluminates having a nominal composition MgAl 2 Γ x Co x O 4 where x ΒΌ 0.0, 0.5, 1.0, 1.5, 2.0 were synthesized by the chemical co-precipitation method. Aluminium (Al 3 + ) ions were completely and successfully substituted by Co 2 + ions, which yielded an electron rich terminal compound MgCo 2 O 4 . All the samples were characterized by means of X-ray diffraction (XRD), thermogravimetry and differential thermal analysis (TG/DTA) and dc electrical resistivity measurements. The investigated samples were found to be spinel single phase cubic close packed crystalline materials as demonstrated by XRD data. Using the Debye Scherer formula, the calculated crystallite size was found Co 2 + concentration dependent and varied between 7 and 19 nm. The lattice constant, X-ray density and bulk density were found to increase while percentage porosity decreases on increasing the Co 2 + concentration. The dc electrical resistivity was found to decrease as a function of temperature as expected for a typical semiconductor. The doped Co 2 + ions are believed to form small polarons and hopping of these small polarons between the adjacent sites seems to be partially responsible for conduction in the system. The activation energy of hopping of small polarons was also calculated.
π SIMILAR VOLUMES
Fine crystalline LaFeO 3 and antimony-substituted compounds have been prepared by coprecipitation method. The as synthesized materials have been sintered at 1000 β’ C for single-phase compound formation and evaluated for their electrical and structural properties. TG/DTA studies ascribed that the pre
Specimens of two ceramic groups ofvariable alkali, boron and alumina contents were prepared and exposed to fission neutron (252Cf source). Two techniques of irradiation were used. In the first technique, each sample received an accumulativefluence up to 1010 n/cm2. After each exposure the electric p