✦ LIBER ✦

Effect of stoichiometry on mechanochemical reaction between Ti and Si3N4 powders

✍ Scribed by Jung-Soo Byun; Jae-Hyeok Shim; Young Whan Cho

Book ID: 113894798
Publisher: Elsevier Science
Year: 2004
Tongue: English
Weight: 401 KB
Volume: 50
Category: Article
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2003.09.050

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Influence of stearic acid on mechanochem

Influence of stearic acid on mechanochemical reaction between Ti and BN powders

✍ Jung-Soo Byun; Jae-Hyeok Shim; Young Whan Cho 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 540 KB

Hot Isostatic Pressing of Si3N4 Powder C

Hot Isostatic Pressing of Si3N4 Powder Compacts and Reaction-Bonded Si3N4

✍ Juergen Heinrich; Eberhard Backer; Manfred Böhmer 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 474 KB

The Effect of Ti on the Reaction Phases

The Effect of Ti on the Reaction Phases at the Interface Between a Ag Filler and Si3N4

✍ W. Dümmler; S. Weber; C. Tête; S. Scherrer 📂 Article 📅 1999 🏛 Springer 🌐 English ⚖ 110 KB

Combustion synthesis of TiN–Ti silicide

Combustion synthesis of TiN–Ti silicide and TiN–Si3N4 composites from Ti–Si3N4 powder compacts in Ar and N2

✍ C.L. Yeh; C.Y. Chen 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 885 KB

Preparation of GaN powder by mechanochem

Preparation of GaN powder by mechanochemical reaction between Ga2O3 and Li3N

✍ Junya Kano; Eiko Kobayashi; William Tongamp; Fumio Saito 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 329 KB

Effect of Ti content on microstructure a

Effect of Ti content on microstructure and strength of Si3N4/Si3N4 joints brazed with Cu–Pd–Ti filler metals

✍ C.F. Liu; J. Zhang; Y. Zhou; Q.C. Meng; M. Naka 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 655 KB

A novel Cu-Pd-Ti filler alloy was adopted to braze silicon nitride ceramic to itself in the form of Cu/(Ti, Pd)/Cu. The reliable Si 3 N 4 joints were obtained. The effect of Ti content on the microstructure and properties of the Si 3 N 4 joints was investigated using EPMA, SEM and three-point bendin