𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of SrO on densification and mechanical properties of reaction-sintered mullite-zirconia

✍ Scribed by Seher Kinikoğlu; Müzeyyen Marṡoğlu

Publisher
Elsevier Science
Year
1994
Tongue
English
Weight
759 KB
Volume
14
Category
Article
ISSN
0955-2219

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Densification and mechanical properties
Densification and mechanical properties of liquid phase sintered tantalum
✍ M. Filgueira; D. G. Pinatti; J. N. F. de Holanda; U. U. Gomes 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 322 KB

## Abstract This paper has as main objective to investigate the influence of nickel (Ni), iron (Fe) and copper (Cu) addition on the tantalum (Ta) powder processing, by promoting a liquid phase sintering (LPS). The role of these metals is to lower the Ta sintering temperature, maintaining good densi

The effect of sintering time on the dens
The effect of sintering time on the densification and mechanical properties of a mechanically alloyed Cr–Mn–N stainless steel
✍ Erfan Salahinejad; Rasool Amini; Mehdi Marasi; Mohammad Jafar Hadianfard 📂 Article 📅 2010 🏛 Elsevier Science ⚖ 720 KB

Sintering is an essential stage in powder metallurgy, which affects the final microstructure and performance of the part. This study is concerned with the sintering and mechanical behaviors of Fe-18Cr-8Mn-0.9N stainless steel prepared from mechanically alloyed amorphous/nanocrystalline powders. The

Spark plasma sintering of a commercially
Spark plasma sintering of a commercially available granulated zirconia powder: I. Sintering path and hypotheses about the mechanism(s) controlling densification
✍ Guillaume Bernard-Granger; Christian Guizard 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 682 KB

Spark plasma sintering (SPS) of a commercially available granulated zirconia powder has been investigated. The ''relative density/ grain size'' trajectory, or ''sintering path'', has been established for a constant heating rate (50 °C/min) and a constant applied pressure (100 MPa). In addition, an a