✦ LIBER ✦

Effect of squeeze casting parameters on the mechanical properties of AZ91–Ca Mg alloys

✍ Scribed by C.S. Goh; K.S. Soh; P.H. Oon; B.W. Chua

Publisher: Elsevier Science
Year: 2010
Weight: 591 KB
Volume: 31
Category: Article
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2009.11.039

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effects of Ca and Sr addition on mechani

Effects of Ca and Sr addition on mechanical properties of a cast AZ91 magnesium alloy at room and elevated temperature

✍ Kinji Hirai; Hidetoshi Somekawa; Yorinobu Takigawa; Kenji Higashi 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 239 KB

Influence of applied pressure on microst

Influence of applied pressure on microstructure and tensile properties of squeeze cast magnesium Mg–Al–Ca alloy

✍ Mohsen Masoumi; Henry Hu 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 968 KB

Effect of ultrasonic power on microstruc

Effect of ultrasonic power on microstructure and mechanical properties of AZ91 alloy

✍ Deming Gao; Zhijun Li; Qingyou Han; Qijie Zhai 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 846 KB

Effect of melting technique on the micro

Effect of melting technique on the microstructure and mechanical properties of AZ91 commercial magnesium alloys

✍ Peng Zhao; Haoran Geng; Qudong Wang 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 419 KB

Influences of Grain Size on Mechanical P

Influences of Grain Size on Mechanical Properties of Extruded AZ91 Mg Alloy after Different Extrusion Processes

✍ Y. Chino; M. Mabuchi 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 200 KB

The influence of manganese addition on m

The influence of manganese addition on mechanical properties of commercial Al-4Mg casting alloys

✍ A. Bayram 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 459 KB

## Abstract The aim of this study was to investigate the mechanical properties of Al‐Mg‐Si alloys aged to peak hardness with different dispersoid volume fraction. It was found that the tensile strength increases with dispersoid content, for alloys having similar ductility. The effect of an increasi