๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Effect of spherulites on the mechanical properties of nylon 66

โœ Scribed by Howard W. Starkweather Jr.; Richard E. Brooks


Publisher
John Wiley and Sons
Year
1959
Tongue
English
Weight
342 KB
Volume
1
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

โœฆ Synopsis


Abstract

The presence of spherulites in nylon 66 increases the yield point and reduces the effects of variations in per cent crystallinity. Decreasing the size of the spherulites through increased nucleation results in a higher flexural modulus and yield point, a lower ultimate elongation, and a loss of ductility. These effects are markedly reduced by raising the temperature or water content. The effects of spherulite size in nylon and grain size in metals such as mild steel are compared.


๐Ÿ“œ SIMILAR VOLUMES


Dynamic mechanical properties of nylon 6
โœ J. M. R. Quistwater; B. A. Dunell ๐Ÿ“‚ Article ๐Ÿ“… 1959 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 464 KB ๐Ÿ‘ 2 views

## Abstract The dynamic tensile modulus and energy loss have been measured for nylon 66 monofilaments at 9 and 60ยฐC. over a wide humidity range in forced longitudinal vibration experiments. The frequency range covered was about 3 to 30 cycles/sec. (radian frequency 20 to 200 sec.^โˆ’1^). The results

Effects of acid dyes on crystallization
โœ Weiping Lin; Yasser Gowayed ๐Ÿ“‚ Article ๐Ÿ“… 1999 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 278 KB ๐Ÿ‘ 1 views

Nylon fibers dyed with different types of acid dyes were melt reprocessed using a compression-molding machine. The crystalline structure and mechanical properties of the melt-reprocessed nylon were experimentally evaluated. It was found that metal complex acid dyes showed much more distinct effects

Blends of nylon with polyethylene: Effec
โœ Rupali Gadekar; Asmita Kulkarni; J. P. Jog ๐Ÿ“‚ Article ๐Ÿ“… 1998 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 306 KB ๐Ÿ‘ 2 views

Blends of Nylon 6 with very low density polyethylene (VLDPE) have been studied. The blends exhibit two phase morphology wherein VLDPE is dispersed in the form of spherical domains in Nylon 6 matrix. The water absorption of the blends decreased with increasing VLDPE content. The mechanical properties