Effect of Solvent Characteristics on the Ultrasonic Degradation of Poly(vinylpyrrolidone) Studied by On-line Monitoring
✍ Scribed by Ali Akyüz; Huceste Catalgil-Giz; Ahmet Giz
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 597 KB
- Volume
- 210
- Category
- Article
- ISSN
- 1022-1352
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Ultrasonic degradation of high molecular weight poly(vinylpyrrolidone) is monitored on‐line, by light scattering. Degradations are performed in water/methanol mixtures of various compositions at room temperature. The evolutions of the weight average molecular weight and the radius of gyration are monitored. The dependence of the radius of gyration on the molecular weight is found. The second virial coefficients (A~2~) of polymer samples in each solvent are found using Zimm plots. These mixtures are found to be close to theta solvents for poly(vinylpyrrolidone). Degradation rate constants and limit molecular weights are correlated with the radii of gyration and A~2~ coefficients of the polymer in the solvents studied. It is found that degradation is more effective in better solvents.
The dependence of the degradation parameters on solvent characteristics (e.g., the enthalpy of vaporization, solvent viscosity and surface tension) was also investigated and found to be much less significant than for the parameters above.
magnified image
📜 SIMILAR VOLUMES
The effect of solvents on the degradation of poly(methy1 methacrylate), polystyrene, and polyisobutylene by high-speed stirring (30,000 rpm) at 30°C was studied. From the intrinsic viscosities of polymers stirred for given times, the viscosity-average degree of polymerization, p , was obtained and t
## Thermal degradation of poly(viny1 chloride) Act? Polymericr 41 (1990) Nr. I 71 fur die Charakterisierung von Betriebs-und Versuchsviskosen ausreichend sind. Eine Messung ohne Probenvorbereitung benotigt bei einer 3fach-Bestimmung jeder PartikelgroBe etwa 3 bis 4 Minuten. Die vom Meagerat abgel
## Abstract The tensile strengths of poly(glycolic acid) (PGA) sutures immersed in buffered and unbuffered aqueous media were compared. The media used were an unbuffered physiological saline solution (pH = 5.0) and a phosphate‐buffered physiological saline solution (pH = 7.4). PGA samples were imme