𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of solution treatment on the hot workability of electroslag remelted Ni−Cr−Mo alloy

✍ Scribed by Tae-Kyu Kim; Jinsung Jang; Jun-Hwa Hong

Publisher
TechnoPress
Year
2002
Tongue
English
Weight
1017 KB
Volume
8
Category
Article
ISSN
1598-9623

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of homogenization and precipitati
Effect of homogenization and precipitation treatments on the hot workability of an aluminium alloy AA2024
✍ P. Wouters; B. Verlinden; H.J. McQueen; E. Aernoudt; L. Delaey; S. Cauwenberg 📂 Article 📅 1990 🏛 Elsevier Science 🌐 English ⚖ 574 KB

Hot-torsion tests have been carried out at 310 and 370 °C (at a strain rate of l s-i) on an AA 2024 aluminium alloy homogenized for 8 h at between 420 and 520 °C and either just water quenched or air cooled and aged at 290 or 350 °C. The flow curves exhibited a large peak stress ap and work softenin

Effect of chemical composition on the co
Effect of chemical composition on the corrosion behavior of Ni-Cr-Mo dental casting alloys
✍ Huang, Her-Hsiung 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 910 KB

## Abstract The objective of this investigation was to study the compositional influence on the corrosion behavior of Ni‐Cr‐Mo dental casting alloys in acidic artificial saliva. Cyclic potentiodynamic and potentiostatic tests were used to evaluate the corrosion behavior of different Ni‐Cr‐Mo dental