✦ LIBER ✦

Effect of Silicon Oxide Fillers on Photochemical Curing of Compounds Based on Acrylic Monomers and Oligomers

✍ Scribed by D. L. Starokadomskii; T. N. Solov'eva

Book ID: 110338496
Publisher: SP MAIK Nauka/Interperiodica
Year: 2002
Tongue: English
Weight: 37 KB
Volume: 75
Category: Article
ISSN: 1070-4272
DOI: 10.1023/a:1015597713736

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of fillers on curing of wood surf

Effect of fillers on curing of wood surfaces with polyester oligomers by ultraviolet radiation

✍ M. D. H. Beg; Mubarak A. Khan; M. Z. Abedin 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 114 KB 👁 2 views

Study on the Physico-mechanical Properti

Study on the Physico-mechanical Properties of Photo-cured Chitosan Films with Oligomer and Acrylate Monomer

✍ Rashidul Alam; Mubarak A. Khan; Ruhul A. Khan; Sushanta Ghoshal; M. I. H. Mondal 📂 Article 📅 2008 🏛 Springer US 🌐 English ⚖ 451 KB

Effect of the curing cycle on residual m

Effect of the curing cycle on residual monomer levels of acrylic resin denture base polymers

✍ A. Harrison; R. Huggett 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 569 KB

Studies on radiation curing of acrylate

Studies on radiation curing of acrylate coating—I The effect of oligomer structures and molecular weight on radiation curing rate

✍ Ma Zue-Teh; Dong Liang-Chang 📂 Article 📅 1983 🏛 Elsevier Science ⚖ 310 KB

Curing behavior and cured film performan

Curing behavior and cured film performance of easy-to-clean UV-curable coatings based on hybrid urethane acrylate oligomers

✍ Supranee Kaewpirom, Dapawan Kunwong 📂 Article 📅 2012 🏛 Springer 🌐 English ⚖ 430 KB

Effect of curing agent on interfacial ad

Effect of curing agent on interfacial adhesion in acrylic polymer-based laminates

✍ J. Wootthikanokkhan; R. P. Burford; R. P. Chaplin 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 237 KB 👁 2 views

The effect of crosslinking on interfacial adhesion between an acrylic elastomer and poly(methyl methacrylate) has been studied using a 90Њ peel test. Elastomers were master-batched with a 1 : 10 sulfur/sodium mixture. The compounded elastomer was then bonded with poly(methyl methacrylate) by in situ