EFFECT OF SIDE-GROOVES ON FATIGUE CRACK RETARDATION
โ Scribed by J. P. Hess; A. F. Grandt Jr; A. Dumanis
- Book ID
- 109011984
- Publisher
- John Wiley and Sons
- Year
- 1983
- Tongue
- English
- Weight
- 554 KB
- Volume
- 6
- Category
- Article
- ISSN
- 8756-758X
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
Abstract4onstant amplitude and spectrum loading fatigue crack growth rate tests were performed on HP-9Ni4X+3OC steel heat treated to three strength levels. It was concluded that the constant nmplltude crack growth rate is dependent on the stxenath level of the material and independent of the toughne
This paper describes research directed toward developing the "crack growth gage" technique for tracking fatigue damage in a fleet of similar structures. The long-term goal is to provide a simple field level technique for assessing the severity of service loads with respect to their potential for cau
The efficiency of several fatigue crack retarding methods are examined. Al-alloy flat specimens with a central "key hole" starter notch were tested in a closed-loop servo hydraulic test machine. After the cracks had propagated to a predefined value, the following crack retarding methods were underta
A stochastic approach to fatigue crack growth under random overload sequences, superimposed on a base-line cyclic load, is described. The approach consists in presentation of the delay time due to the retardation effect associated with the overload peaks as a purely discontinuous Markov process. A n