## Abstract This paper describes the effects of heat treatment and of SiC particle incorporation on the electrochemical behavior and physical structure of Niο£ΏP (17βat% P) composite coatings. The deposits were obtained by electrodeposition with various contents of SiC particles in the plating bath a
Effect of SiC coating and heat treatment on damping behavior of C/SiC composites
β Scribed by Qing Zhang; Laifei Cheng; Wei Wang; Litong Zhang; Yongdong Xu
- Publisher
- Elsevier Science
- Year
- 2008
- Tongue
- English
- Weight
- 848 KB
- Volume
- 473
- Category
- Article
- ISSN
- 0921-5093
No coin nor oath required. For personal study only.
π SIMILAR VOLUMES
A SiC/Mo-Si multilayer coating was prepared on the surface of C/SiC composites by chemical vapor deposition (CVD) combined with slurry painting. The coating was composed of a dense CVD SiC coating alternating with a porous Mo-Si layer. From inside to outisde the coating consisted of CVD SiC, Mo-Si,
The effects of moisture on fatigue performance of a ceramic matrix composite (CMC) at an elevated temperature were investigated. CMC consisted of silicon carbide fiber reinforced in silicon carbide matrix with boron nitride (BN) interphase. Two series of tension-tension fatigue tests at a frequency
The internal friction of two-dimensional C/SiC composites (2D-C/SiC) was investigated in air by means of three-point bending forced vibration, compared with the specimens after heat treatment. The result shows that the effects of PyC interface between carbon fibers and SiC matrix play an important r