✦ LIBER ✦

Effect of processing techniques on the mechanical and wear properties of Al-20Si alloy

✍ Scribed by K. Raju; A. P. Harsha; S. N. Ojha

Book ID: 107683024
Publisher: Springer-Verlag
Year: 2011
Tongue: English
Weight: 455 KB
Volume: 64
Category: Article
ISSN: 0972-2815
DOI: 10.1007/s12666-011-0001-0

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Investigation on the Wear Properties of

Investigation on the Wear Properties of Primary Si Modified Al–20Si Alloy

✍ K. Raju, Canute Sherwin, S. N. Ojha 📂 Article 📅 2012 🏛 Springer-Verlag 🌐 English ⚖ 346 KB

Effect of Fe and Mn additions on microst

Effect of Fe and Mn additions on microstructure and wear properties of spray-deposited Al–20Si alloy

✍ Feng Wang; Zhengye Zhang; Yajun Ma; Yuansheng Jin 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 661 KB

Effect of grain refinement on wear prope

Effect of grain refinement on wear properties of Al and Al–7Si alloy

✍ A.K. Prasada Rao; Karabi Das; B.S. Murty; M. Chakraborty 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 193 KB

Effect of composition and processing rou

Effect of composition and processing route on the wear behaviour of Al–Si alloys

✍ L Lasa; J.M Rodriguez-Ibabe 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 283 KB

Effect of Si content on the dry sliding

Effect of Si content on the dry sliding wear properties of spray-deposited Al–Si alloy

✍ Feng Wang; Huimin Liu; Yajun Ma; Yuansheng Jin 📂 Article 📅 2004 🏛 Elsevier Science ⚖ 585 KB

In the present investigation, Al-12Si, Al-20Si and Al-25Si (wt%) alloys were synthesized by spray atomization and deposition technique. The wear resistance of the alloys was studied using a pin-on-disc machine under four loads, namely 8.9, 17.8, 26.7 and 35.6 N. The microstructures, worn surfaces an

Effects of complex modificating techniqu

Effects of complex modificating technique on microstructure and mechanical properties of hypereutectic Al–Si alloys

✍ Yujie Sun; Qinglei Wang; Haoran Geng 📂 Article 📅 2011 🏛 Springer 🌐 English ⚖ 807 KB