𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of Plasma Nitriding Environment and Time on Plain Fatigue and Fretting Fatigue Behavior of Ti–6Al–4V

✍ Scribed by M. Mubarak Ali; S. Ganesh Sundara Raman

Publisher
Springer US
Year
2010
Tongue
English
Weight
766 KB
Volume
38
Category
Article
ISSN
1023-8883

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Fatigue Behavior of Ti-6Al-4V
Fatigue Behavior of Ti-6Al-4V
✍ M. A. Däubler; G. Lütjering 📂 Article 📅 1982 🏛 John Wiley and Sons 🌐 English ⚖ 426 KB

## Abstract Low‐cycle‐fatigue texts in vacuum and air were performed. Under cyclic loading the Ti‐6Al‐4V showed both cyclic hardening and cyclic softening depending on heat treatment, stress amplitude, and microstructure. Plastic deformation of the β‐phase in the unaged condition due to stress indu

Effect of surface treatments on fretting
Effect of surface treatments on fretting fatigue of Ti–6Al–4V
✍ Patrick J. Golden; Alisha Hutson; Vasan Sundaram; James H. Arps 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 351 KB

The objective of this work was to investigate the performance of several coatings and surface treatments subjected to fretting fatigue with Ti-6Al-4V specimens and pads. Five coating systems were initially chosen and tested using two different fretting fatigue apparatus. The five coating systems con

Effect of ion implantation on fatigue, f
Effect of ion implantation on fatigue, fretting and fretting-corrosion of Ti6Al4V
✍ S Saritas; R.P.M Procter; W.A Grant 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 883 KB

Earlier studies of the effect of ion implantation on wear of Ti-6Al-4V have now been extended to an examination of the effect of ion implantation on fatigue, fretting and fretting-corrosion of this alloy. Using smooth rotating-bending fatigue specimens tested in air at a frequency of 47Hz it has bee