Effect of physical aging on fracture behavior of polyphenylquinoxaline films
โ Scribed by Wanjun Liu; Jingshu Shen; Fengcai Lu; Mao Xu
- Publisher
- John Wiley and Sons
- Year
- 2000
- Tongue
- English
- Weight
- 182 KB
- Volume
- 78
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
โฆ Synopsis
The influence of physical aging on the tensile fracture behavior of notched Polyphenylquinoxaline (PPQ-E) samples has been studied. The dependence of fracture stress and strain on physical aging has been explained. The glass transition temperature (T g ) and the endothermic peak at the end of T g transition with different physical aging were characterized using differential scanning calorimetry (DSC) and the results have also been explained. The morphology of fracture surface was observed by scanning electron microscopy (SEM).
๐ SIMILAR VOLUMES
Physical aging of films of poly(ether ether ketone) kept for 2 months at 120ะC was studied. The extent of aging was evaluated with different techniques. Aged samples show different thermal behavior and exhibit different mechanical, transport, and viscoelastic properties. An attempt was made to estab
The effects of aging on polyethylene film deposited by radiofrequency sputtering on a quartz crystal microbalance were examined by measuring its resonance frequency and conductance, and by measuring the contact angle of the film to distilled water. The film sputtering was observed using in situ opti
The effect of moisture absorption on fracture behaviors of acrylonitrilebutadiene-styrene (ABS) resin has been studied. For comparison, polystyrene (PS) and styrene-acrylonitrile (SAN) resin have been tested. The fracture toughness of PS and SAN resins is determined by the ASTM standard test method
The effect of physical ageing on viscoelastic properties was studied for semi-IPNs based on crosslinked polyurethane and poly(butyl methacrylate) taken in the ratio 75/25 by mass. The viscoelastic properties of IPNs were studied after physical ageing and after heat treatment at 60 ยฐC. Signiยฎcant cha