𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Effect of organophilic montmorillonite on polyurethane/montmorillonite nanocomposites

✍ Scribed by Bing Han; Aimin Cheng; Gending Ji; ShiShan Wu; Jian Shen


Publisher
John Wiley and Sons
Year
2003
Tongue
English
Weight
119 KB
Volume
91
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

Different kinds of organophilic montmorillonite cotreated by cetyltrimethyl ammonium bromide (CTAB) and aminoundecanoic acid (AUA) were synthesized and applied to prepare polyurethane/montmorillonite nanocomposites via solution intercalation. The results of wide‐angle X‐ray diffraction (WAXD) and transmission electron microscopy showed that, for the montmorillonite modified with CTAB and CTAB/AUA (molar ratio of 1/2), an ordered intercalated nanostructure was derived, while for the montmorillonite treated with AUA, a disordered nanostructure was derived. The tensile properties of the polyurethane (PU) nanocomposites showed higher enhancement relative to PU matrix. TG showed that there is some enhancement in degradation behavior between the nanocomposites and PU matrix. DMTA results showed that nanocomposites from some organophilic montmorillonites showed a much higher storage modulus below and above glass transition temperature, while the nanocomposites from montmorillonite treated by AUA show an even lower storage modulus. The loss curves showed that the main glass transition temperature of PU was improved to some extent for the nanocomposites. The water absorption of PU and nanocomposites was also studied and the difference in reduction was thoroughly analyzed. Β© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2536–2542, 2004


πŸ“œ SIMILAR VOLUMES


Effect of epoxy resin on morphology and
✍ Chaoying Wan; Xiuying Qiao; Yong Zhang; Yinxi Zhang πŸ“‚ Article πŸ“… 2003 πŸ› John Wiley and Sons 🌐 English βš– 203 KB πŸ‘ 2 views

## Abstract Poly(vinyl chloride)/organophilic montmorillonite (PVC/OMMT) nanocomposites were prepared by means of melt blending. A liquid epoxy resin was used to aid PVC chains in intercalating into silicate layers. The effects of the preparation methods and epoxy resin contents on the melt interca