Effect of Organoclay on the Orientation and Thermal Properties of Liquid-Crystalline
✍ Scribed by Jayita Bandyopadhyay; Suprakas Sinha Ray; Mosto Bousmina
- Publisher
- John Wiley and Sons
- Year
- 2007
- Tongue
- English
- Weight
- 481 KB
- Volume
- 208
- Category
- Article
- ISSN
- 1022-1352
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
The preparation and thermal and thermo‐mechanical properties of nanocomposites based on liquid‐crystalline polymers (LCP) and organically‐modified layered silicate (OMLS) is described. From XRD patterns, very little smectic ordering is present in the pure LCP; in the nanocomposites, the polymer chains tended to orient in the direction of the dispersed clay layers. According to the DSC results, during first heating, the first melting peak represents the crystalline to nematic transition and, after that, a broader isotropization takes place. Although TGA of the samples showed a single‐step decomposition through chain scission under an inert atmosphere, in air the nanocomposites underwent a two‐step process, with onset of degradation at a higher temperature. The first step is mainly due to chain scission and the second is due to oxidative reactions.
magnified image
📜 SIMILAR VOLUMES
Investigations of dielectric relaxation and thermal properties of mixtures composed of liquid crystalline side-chain polysiloxane and low molecular mass azo-dye have been carried out. The dyes have been chosen to solublize well in the polymer matrix at concentrations up to 0.08 mol fraction. The die
## Abstract This report highlights the importance of nanocomposite formation and dispersion upon improvements in properties for high performance epoxy based layered silicate nanocomposites. This is achieved through the preparation of epoxy nanocomposites with varying clay concentrations using ultra
Liquid crystalline epoxy resins were prepared by the curing reaction of epoxy and amine compounds with a mesogenic group in the mesomorphic temperature range. Some epoxy resins exhibited a typical liquid crystalline phase. Curing reaction of a mesogenic epoxy compound with an aliphatic amine compoun