✦ LIBER ✦

Effect of MTT on the mechanical properties of D16 plates subjected to biaxial tension

✍ Scribed by N. I. Demina; A. K. Volkov

Publisher: Springer US
Year: 1981
Tongue: English
Weight: 166 KB
Volume: 23
Category: Article
ISSN: 0026-0673
DOI: 10.1007/bf01226368

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of loading parameters on the mech

Effect of loading parameters on the mechanism of small plastic deformation in tungsten subjected to uniaxial tension

✍ A. V. Volkov; P. P. Shiryaev; G. A. Filippov 📂 Article 📅 1980 🏛 Springer US 🌐 English ⚖ 154 KB

Effect of the Zener–Hollomon parameter o

Effect of the Zener–Hollomon parameter on the microstructures and mechanical properties of Cu subjected to plastic deformation

✍ Y.S. Li; Y. Zhang; N.R. Tao; K. Lu 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 854 KB

Pure Cu was deformed at different strain rates and temperatures, i.e. with different Zener-Hollomon parameters (Z) ranging within ln Z = 22-66, to investigate the effect of Z on its microstructures and mechanical properties. It was found that deformation twinning occurs when ln Z exceeds 30, and the

Effect of environmental factors on the m

Effect of environmental factors on the mechanical properties of grafted casein films: Influence of humidity and biaxial orientation

✍ N. Somanathan 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 599 KB

Casein was grafted with acrylonitrile and with a binary mixture of acrylonitrile and n-butyl methacrylate. The influence of absorbed moisture a t different relative humidities on the stress-strain characteristics was studied. Tensile properties were very much affected by the absorbed moisture in bot

The effect of a non-zero cavitation tens

The effect of a non-zero cavitation tension on the damage sustained by a target plate subject to an underwater explosion

✍ M.R. Driels 📂 Article 📅 1980 🏛 Elsevier Science 🌐 English ⚖ 785 KB

Effect of material properties on the sta

Effect of material properties on the stability of transversely isotropic shells with an elastic filler subjected to the action of mechanical loads and temperature

✍ B. L. Pelekh; G. A. Teters; R. V. Mel'nik 📂 Article 📅 1973 🏛 Springer US 🌐 English ⚖ 224 KB

Effect of quartz particle size on the me

Effect of quartz particle size on the mechanical behaviour of porcelain tile subjected to different cooling rates

✍ Agenor De Noni Junior; Dachamir Hotza; Vicente Cantavella Soler; Enrique Sanchez 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 806 KB

Porcelain tile is a high-performance ceramic tile, in which quartz is a major compositional component. After the firing cycle, macroscopic residual stresses develop in the product as a result of rapid cooling. Further, during cooling, the presence of quartz particles also increases natural flaw size