Effect of Mo–Ni treatment on electrochemical kinetics of La–Mg–Ni-based hydrogen storage alloys
✍ Scribed by Yuan Li; Shumin Han; Zhiping Liu
- Publisher
- Elsevier Science
- Year
- 2010
- Tongue
- English
- Weight
- 608 KB
- Volume
- 35
- Category
- Article
- ISSN
- 0360-3199
No coin nor oath required. For personal study only.
✦ Synopsis
In order to improve kinetic properties of LaeMgeNi-based hydrogen storage alloys, MoeNi treatment was applied to La 0.88 Mg 0.12 Ni 2.95 Mn 0.10 Co 0.55 Al 0.10 alloy powders. FESEM results showed that after MoeNi treatment some network-shaped substance with nano-size formed on the surface of the alloy particles. The EDS results revealed increase in Ni content and emerge of Mo element. EIS and Linear polarization showed that charge-transfer resistance decreased and exchange current density increased for the treated alloy electrode, and the high rate dischargeability (HRD) was consequently improved. HRD at 1500 mA/g increased from 22.5% to 39.5%. Mo-and Ni-single treatments were performed compared with the MoeNi treatment, and the results showed that the single treatment improved HRD slightly, far less than the MoeNi treatment.
📜 SIMILAR VOLUMES
a b s t r a c t Mg 1Àx Pd x Ni (x ¼ 0.03, 0.05, 0.06, 0.07, 0.08, 0.10, 0.20) type alloys were synthesized by mechanical alloying and their electrochemical hydrogen storage characteristics were investigated. The XRD studies showed that Mg 6 Pd and MgePd phases form in the high-Pdcontaining alloys. T
Two kinds of kinetic models, which are Jander model and Chou model, were applied to investigate the hydriding kinetic behavior of MgeNi based alloys. By comparing the calculated values with experimental data, it can be seen that both models were successfully used in the diffusion-controlled hydrogen
Electrochemical characterization of Mg,Ni alloy was carried out at various temperatures. Discharge capacity of the Mg,Ni alloy electrode remarkably increased at 70°C and WC in comparison with that at 30°C. The charge-discharge curves as well as the measured pressure-composition isotherms revealed th
In order to improve the electrochemical performances of La-Mg-Ni system (PuNi 3 -type) hydrogen storage alloy, a trace of boron was added in La 2 Mg(Ni 0.85 Co 0.15 ) 9 and rapid quenching techniques were used. La 2 Mg(Ni 0.85 Co 0.15 ) 9 B x (x = 0, 0.05, 0.1, 0.15, 0.2) hydrogen storage alloys wer